349F and 352F Excavators Machine System Specifications Caterpillar


Hydraulic Oil Cooler Lines Group

Usage:

352F-VG A9J


Illustration 1g03356035

Table 1
Specification for 330-2504 Hydraulic Oil Cooler Lines Gp 
Item  Qty  Part  Specification Description 
096-4883 Locknut  Torque to 22 ± 3 N·m (195 ± 27 lb in).
For thin wall pipe torque to 15.0 ± 1.5 N·m (132.8 ± 13.3 lb in)
108-1781 Bolt  Torque to 50 ± 10 N·m (37 ± 7 lb ft)
144-0367 Hose Clamp  Tighten the clamps by maintaining dimension as shown in Illustration 1.
Dimension (B) is 65.0 ± 5.0 mm (2.56 ± 0.20 inch).
Dimension (C) is 10.0 ± 3.0 mm (0.39 ± 0.12 inch).
Dimension (D) is 5.0 ± 3.0 mm (0.20 ± 0.12 inch)

Caterpillar Information System:

777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Control Valve - Calibrate
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Control Valve - Adjust
349F and 352F Excavators Machine System Specifications Boom Cylinder
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Naturally Aspirated Marine Generator Sets
3516B Engine for the MT4400D Off-Highway Truck Flywheel Housing
3512E Tier 4 Final Engines for Land Electric Drilling Flywheel
G3500H 50Hz Generator Sets Fluid Recommendations
G3500 Generator Sets Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129} Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Pressure Sensor (Water Level) - Calibrate
374F Excavator Hydraulic System Electronic Control (Stick System)
G3500H 50Hz Generator Sets Alarms and Shutoffs
2013/03/29 Improved VisionLinkTMStore is Now Available for all Caterpillar Products {7606}
2013/03/13 A New Injector Hydraulic Pump Group Is Available For Certain C9 Marine Engines {1714}
2013/03/29 Device Transfers Are Now Supported In VisionLinkTM Store {7606}
2013/03/29 Improved VisionLinkTM Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
G3500H 50Hz Generator Sets Additional Messages
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Boost Pressure Sensor
C7.1 Marine Engine Air Starting Motor - Remove and Install
C18 Marine Engines Diagnostic Trouble Codes
C7.1 Marine Engine Fuel Injection Lines - Remove and Install - Non M.C.S. Fuel Injection Lines
C7.1 Marine Engine Fuel Injection Lines - Remove and Install - Double Wall Fuel Injection Lines
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Fuel Injection Lines
374F Excavator Machine System Oil Filter (Hydraulic)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.