Boom Cylinder
Show/hide table
| |
| Illustration 1 | g06095656 |
Show/hide table
| Specification for 419-5749 Boom Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 191-5644 Bushing | Outside diameter is Thickness is |
| 2 | 1 | 324-9484 Buffer Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 3 | 1 | 324-9486 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 4 | 1 | 191-5648 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 5 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
| 6 | 2 | 191-5604 Ring | Lubricate the inside diameter and the outside diameter with hydraulic oil. |
| 7 | 1 | 506-2322 Seal As | Lubricate the inside diameter and the outside diameter with hydraulic oil. |
| 8 | 1 | 191-5605 Ring | Lubricate the inside diameter and the outside diameter with hydraulic oil. |
| A | 1 | 358-8440 Cylinder As | Bore is |
| B | 1 | 358-8450 Rod As | Diameter is |
| C | 1 | 375-1723 Head | Bore over two lands is |
| 9 | 1 | 7Y-4956 Locknut | Before assembly, lubricate the face and all around the threads with 309-6932 Hydraulic Oil.
Torque to |
| 10 | 1 | 231-6843 Seal Ring | The slit must be turned in the direction of piston. |
| 11 | 1 | 332-4991 Bushing | Bore before assembly is Installation depth is |
| 12 | 1 | 228-5621 Bushing | Bore before assembly is Installation depth is |
| 13 | 8 | 7Y-5239 Bolt | Torque to Turn an additional 30 ± 5 degrees. |
Caterpillar Information System:
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Naturally Aspirated Marine Generator Sets
3516B Engine for the MT4400D Off-Highway Truck Flywheel Housing
3512E Tier 4 Final Engines for Land Electric Drilling Flywheel
G3500H 50Hz Generator Sets Fluid Recommendations
G3500 Generator Sets Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129} Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Pressure Sensor (Water Level) - Calibrate
374F Excavator Hydraulic System Electronic Control (Stick System)
G3500H 50Hz Generator Sets Alarms and Shutoffs
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Torque Converter (Freewheel Stator) (Lockup) - Assemble
G3500H 50Hz Generator Sets Plate Locations and Film Locations
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Turbocharged Aftercooled Marine Generator Sets Rated at 50 Hz 86 ekW and 60 Hz 93 ekW
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Control Valve - Adjust
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Control Valve - Calibrate
349F and 352F Excavators Machine System Specifications Hydraulic Oil Cooler Lines Group
2013/03/29 Improved VisionLinkTMStore is Now Available for all Caterpillar Products {7606}
2013/03/13 A New Injector Hydraulic Pump Group Is Available For Certain C9 Marine Engines {1714}
2013/03/29 Device Transfers Are Now Supported In VisionLinkTM Store {7606}
2013/03/29 Improved VisionLinkTM Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
G3500H 50Hz Generator Sets Additional Messages
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Boost Pressure Sensor
C7.1 Marine Engine Air Starting Motor - Remove and Install
C18 Marine Engines Diagnostic Trouble Codes
C7.1 Marine Engine Fuel Injection Lines - Remove and Install - Non M.C.S. Fuel Injection Lines