Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
- Articulated Truck
- All
- Earthmoving Compactor
- All
- Integrated Toolcarrier
- All
- Landfill Compactor
- All
- Load Haul Dump
- All
- Motor Grader
- All
- Off-Highway Truck/Tractor
- All
- Petroleum Transmission
- All
- Pipelayer
- All
- Track-Type Skidder
- All
- Track-Type Tractor
- All
- Transmission
- All OEM Transmissions
- Underground Articulated Truck
- All
- Wheel Dozer
- All
- Wheel Loader
- All
- Wheel Skidder
- All
- Wheel Tractor-Scraper
- All
For Caterpillar products that are equipped with a freewheel stator converter follow the recommendation given below.
The recommendation is to replace ALL freewheel stator components at Planned Component Repair (PCR), after a freewheel stator failure or if any freewheel stator damage is observed. If there is any reason to replace a single component, all components of the freewheel stator must be replaced. Replacing all the freewheel stator components together helps prevent premature failure and yields the highest service life of the system.
For the purposes of this publication, the components of the freewheel stator consist of the cam, rollers, springs, race or carrier, and thrust or side plates.
Caterpillar Information System:
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Pressure Sensor (Water Level) - Calibrate
374F Excavator Hydraulic System Electronic Control (Stick System)
G3500H 50Hz Generator Sets Alarms and Shutoffs
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Torque Converter (Freewheel Stator) (Lockup) - Assemble
G3500H 50Hz Generator Sets Plate Locations and Film Locations
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Turbocharged Aftercooled Marine Generator Sets Rated at 50 Hz 86 ekW and 60 Hz 93 ekW
2013/04/04 A New Thermostat Housing Bracket Is Used for Certain 3516C Marine Engines {1355}
XQP150 Rental Generator Set Engine Crankcase Breather Element - Replace
XQ375 and XQ425 Rental Generator Sets Maintenance Interval Schedule - 330 kw Ratings and Higher
XQ375 and XQ425 Rental Generator Sets Maintenance Interval Schedule - Prime Power
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Turbocharged Aftercooled Marine Generator Set Rated at 50 Hz 69 ekW and 60 Hz 76 ekW
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
G3500 Generator Sets Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
G3500H 50Hz Generator Sets Fluid Recommendations
3512E Tier 4 Final Engines for Land Electric Drilling Flywheel
3516B Engine for the MT4400D Off-Highway Truck Flywheel Housing
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Naturally Aspirated Marine Generator Sets
349F and 352F Excavators Machine System Specifications Boom Cylinder
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Control Valve - Adjust
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Control Valve - Calibrate
349F and 352F Excavators Machine System Specifications Hydraulic Oil Cooler Lines Group
2013/03/29 Improved VisionLinkTMStore is Now Available for all Caterpillar Products {7606}
2013/03/13 A New Injector Hydraulic Pump Group Is Available For Certain C9 Marine Engines {1714}
2013/03/29 Device Transfers Are Now Supported In VisionLinkTM Store {7606}