Engine Oil Pump
Type ... Gear-driven differential rotor
Number of lobes
- Inner rotor ... 6
- Outer rotor ... 7
Show/hide table
Illustration 1 | g00938064 |
Typical example |
(1) Clearance of the outer rotor to the body ...
Show/hide table
Illustration 2 | g00938061 |
Checking the clearance |
(2) Service limit of inner rotor to outer rotor ...
Show/hide table
Illustration 3 | g00938799 |
Checking the end play |
(3) End play of rotor assembly
- Inner rotor ...
0.050 to 0.180 mm (0.0020 to 0.0071 inch) - Outer rotor ...
0.050 to 0.180 mm (0.0020 to 0.0071 inch) - Outer rotor ...
Show/hide table
Illustration 4 | g03346216 |
Typical example (4) Suction Pipe |
(5) ( 6) Tighten the bolts to the following torque. ...
Caterpillar Information System:
C18 Marine Propulsion Engines Auxiliary Water Pump - Sea Water
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C18 Marine and Marine Generator Set Engines Auxiliary Water Pump - Sea Water
2013/02/22 Bearing Upgrade from Pre 2.4 or 2.4 Bearings to 3.5 Bearing on Certain Uninterruptible Power Supply {4480, 7551}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Problem - Gas System
2013/02/08 A New Turbocharger Group Is Available for Certain C15 Truck Engines {1052, 1053}
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C7.1 Engines for Caterpillar Built Machines Piston and Rings
C9.3 Head Tool Improvements{0599, 0701, 0703, 1100} C9.3 Head Tool Improvements{0599, 0701, 0703, 1100}
C18 Marine Propulsion Engines Cylinder Head Valves
C32 Marine Engines Electric Starting Motor
C18 Marine Propulsion Engines Camshaft
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C7.1 Engines for Caterpillar Built Machines Crankshaft Seals
C32 Marine Engines Auxiliary Water Pump - Sea water
C18 Marine Propulsion Engines Crankshaft
C7.1 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Fuel Injection Pump
C18 Marine Propulsion Engines Piston Cooling Jet
C9.3 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
2013/04/17 Flexible Fuel Lines Groups Are Used for Certain 3500 Locomotive Engines {1274}
C27 and C32 Tier 4 Final Marine Engines Exhaust Elbow
C4.4 Industrial Engine Starting the Engine
2013/04/17 A New Turbocharger Support Assembly Is Used on C280-8 and 3608 Engines {1052}