Auxiliary Water Pump - Sea Water
Show/hide table
 | |
| Illustration 1 | g03346213 |
Left side view of engine | |
Show/hide table
| Specification for 342-1633 Auxiliary Sea Water Pump Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 3N-8468 Clamp As | Use the following procedure in order to tighten the clamp assembly: 1. After installation of elbows, tighten each bolt of clamp assembly to 10 ± 3 N·m (89 ± 27 lb in). 2. Again, final tighten each bolt to 18.5 ± 1.5 N·m (163.7 ± 13.3 lb in). |
Show/hide table
 | |
| Illustration 2 | g03346214 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 2 | 2 | 238-9932 Bearing | Before installation, bore in the bearing for the shaft is 24.996 ± 0.005 mm (0.9841 ± 0.0002 inch). |
| 3 | 1 | 348-5426 Shaft | Diameter (B) of the new shaft is 25.000 mm (0.9843 inch). |
| 4 | 1 | 109-5322 Wear Plate | Thickness of the new wear plate is 1.5 mm (0.06 inch). |
| 5 | 1 | 109-5323 Washer | Thickness of the new washer is 1.22 mm (0.048 inch). |
Caterpillar Information System:
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C18 Marine and Marine Generator Set Engines Auxiliary Water Pump - Sea Water
2013/02/22 Bearing Upgrade from Pre 2.4 or 2.4 Bearings to 3.5 Bearing on Certain Uninterruptible Power Supply {4480, 7551}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Problem - Gas System
2013/02/08 A New Turbocharger Group Is Available for Certain C15 Truck Engines {1052, 1053}
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C7.1 Engines for Caterpillar Built Machines Piston and Rings
C9.3 Head Tool Improvements{0599, 0701, 0703, 1100} C9.3 Head Tool Improvements{0599, 0701, 0703, 1100}
C18 Marine Propulsion Engines Cylinder Head Valves
C32 Marine Engines Electric Starting Motor
C18 Marine Propulsion Engines Camshaft
C7.1 Industrial Engine Diagnostic Flash Code Retrieval
C7.1 Engines for Caterpillar Built Machines Engine Oil Pump
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C7.1 Engines for Caterpillar Built Machines Crankshaft Seals
C32 Marine Engines Auxiliary Water Pump - Sea water
C18 Marine Propulsion Engines Crankshaft
C7.1 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Fuel Injection Pump
C18 Marine Propulsion Engines Piston Cooling Jet
C9.3 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
2013/04/17 Flexible Fuel Lines Groups Are Used for Certain 3500 Locomotive Engines {1274}
C27 and C32 Tier 4 Final Marine Engines Exhaust Elbow
C4.4 Industrial Engine Starting the Engine