A New Turbocharger Group Is Available for Certain C15 Truck Engines {1052, 1053}
- Engine:
- C15 (S/N: SDP1-UP; B5R1-UP)
The new 20R-1177 Turbocharger Gp replaces the existing 357-2114 Turbocharger Gp (High and Mid Mount) and 20R-0581 Turbocharger Gp (High and Mid Mount) on the serial numbers listed above. Refer to Tables 1 and 2 for a list of the parts needed to install the new turbocharger group.
Show/hide table
High Mount Configuration     | ||
Part Number     | Description     | Quantity     |
20R-1177     | Turbocharger Gp     | 1     |
395-1641     | Tube As     | 1     |
395-1638     | Tube As     | 1     |
106-9586     | O-Ring Seal     | 1     |
284-3502     | Band Clamp     | 2     |
395-1640     | Hose     | 1     |
Show/hide table
Mid Mount Configuration     | ||
Part Number     | Description     | Quantity     |
20R-1177     | Turbocharger Gp     | 1     |
395-1643     | Tube As     | 1     |
395-1642     | Tube As     | 1     |
106-9586     | O-Ring Seal     | 1     |
284-3502     | Band Clamp     | 2     |
395-1640     | Hose     | 1     |
Note: The new turbocharger drain line must be installed with the new turbocharger group.
The new turbo charger group is adaptable back to first production on the serial numbers listed above.
Caterpillar Information System:
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C7.1 Engines for Caterpillar Built Machines Piston and Rings
C9.3 Head Tool Improvements{0599, 0701, 0703, 1100} C9.3 Head Tool Improvements{0599, 0701, 0703, 1100}
C18 Marine Propulsion Engines Cylinder Head Valves
C32 Marine Engines Electric Starting Motor
C18 Marine Propulsion Engines Camshaft
C7.1 Industrial Engine Diagnostic Flash Code Retrieval
C18 Marine Propulsion Engines Piston and Rings
C32 Marine Engines Exhaust Manifold - Water cooled
C7.1 Marine Engine Exhaust Manifold - Remove and Install
C7.1 Marine Engine Inlet Manifold - Remove and Install
C175-16 Locomotive Engine Coolant Temperature Is High
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Problem - Gas System
2013/02/22 Bearing Upgrade from Pre 2.4 or 2.4 Bearings to 3.5 Bearing on Certain Uninterruptible Power Supply {4480, 7551}
C18 Marine and Marine Generator Set Engines Auxiliary Water Pump - Sea Water
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C18 Marine Propulsion Engines Auxiliary Water Pump - Sea Water
C7.1 Engines for Caterpillar Built Machines Engine Oil Pump
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C7.1 Engines for Caterpillar Built Machines Crankshaft Seals
C32 Marine Engines Auxiliary Water Pump - Sea water
C18 Marine Propulsion Engines Crankshaft
C7.1 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Fuel Injection Pump