Crankshaft
Show/hide table
 | |
| Illustration 1 | g03346231 |
Show/hide table
 | |
| Illustration 2 | g03346662 |
Show/hide table
| Specification for 384-9630 Crankshaft Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 253-1752 Thrust Plate | Thrust plates should be used only on center main bearing. |
| After assembly, end play of the crankshaft is 0.11 to 0.57 mm (0.004 ± 0.022 inch). |
|||
| A | 1 | 4N-0684 Dowel | Maximum extension of the dowel from the face of the crankshaft is 6.4 mm (0.25 inch). |
| B | 1 | 7S-5005 Dowel | Extension of the dowel from the surface of the crankshaft is 4.1 ± 0.5 mm (0.16 ± 0.02 inch). |
Caterpillar Information System:
C32 Marine Engines Auxiliary Water Pump - Sea water
C7.1 Engines for Caterpillar Built Machines Crankshaft Seals
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C7.1 Engines for Caterpillar Built Machines Engine Oil Pump
C18 Marine Propulsion Engines Auxiliary Water Pump - Sea Water
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C18 Marine and Marine Generator Set Engines Auxiliary Water Pump - Sea Water
2013/02/22 Bearing Upgrade from Pre 2.4 or 2.4 Bearings to 3.5 Bearing on Certain Uninterruptible Power Supply {4480, 7551}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Problem - Gas System
2013/02/08 A New Turbocharger Group Is Available for Certain C15 Truck Engines {1052, 1053}
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C7.1 Engines for Caterpillar Built Machines Piston and Rings
C7.1 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Fuel Injection Pump
C18 Marine Propulsion Engines Piston Cooling Jet
C9.3 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
2013/04/17 Flexible Fuel Lines Groups Are Used for Certain 3500 Locomotive Engines {1274}
C27 and C32 Tier 4 Final Marine Engines Exhaust Elbow
C4.4 Industrial Engine Starting the Engine
2013/04/17 A New Turbocharger Support Assembly Is Used on C280-8 and 3608 Engines {1052}
C7.1 Engines for Caterpillar Built Machines Crankcase Breather
C7.1 Engines for Caterpillar Built Machines Fuel Filter Base - Twin Secondary Fuel Filter Base
C4.4 Industrial Engine Cold Weather Operation
C13, C15, and C18 Tier 4 Interim Engines Codes that Inhibit Operation of Aftertreatment System