C7.1 Engines for Caterpillar Built Machines Caterpillar


Electronic Control Module

Usage:

525D 2L5


Illustration 1g03346233
Typical example
(1) Electronic control module (ECM)

(2) Tighten the four bolts for the ECM to the following torque. ... 22 N·m (16 lb ft)

(3) Tighten the bolt to the following torque. ... 5 N·m (44 lb in)

(4) Tighten the bolt to the following torque. ... 6.5 N·m (58 lb in)

Caterpillar Information System:

C18 Marine Propulsion Engines Crankshaft
C32 Marine Engines Auxiliary Water Pump - Sea water
C7.1 Engines for Caterpillar Built Machines Crankshaft Seals
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C7.1 Engines for Caterpillar Built Machines Engine Oil Pump
C18 Marine Propulsion Engines Auxiliary Water Pump - Sea Water
C7.1 Engines for Caterpillar Built Machines Speed/Timing Sensor
C18 Marine and Marine Generator Set Engines Auxiliary Water Pump - Sea Water
2013/02/22 Bearing Upgrade from Pre 2.4 or 2.4 Bearings to 3.5 Bearing on Certain Uninterruptible Power Supply {4480, 7551}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Problem - Gas System
2013/02/08 A New Turbocharger Group Is Available for Certain C15 Truck Engines {1052, 1053}
C9.3 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C7.1 Engines for Caterpillar Built Machines Fuel Injection Pump
C18 Marine Propulsion Engines Piston Cooling Jet
C9.3 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
2013/04/17 Flexible Fuel Lines Groups Are Used for Certain 3500 Locomotive Engines {1274}
C27 and C32 Tier 4 Final Marine Engines Exhaust Elbow
C4.4 Industrial Engine Starting the Engine
2013/04/17 A New Turbocharger Support Assembly Is Used on C280-8 and 3608 Engines {1052}
C7.1 Engines for Caterpillar Built Machines Crankcase Breather
C7.1 Engines for Caterpillar Built Machines Fuel Filter Base - Twin Secondary Fuel Filter Base
C4.4 Industrial Engine Cold Weather Operation
C13, C15, and C18 Tier 4 Interim Engines Codes that Inhibit Operation of Aftertreatment System
C7.1 Industrial Engine Fluid Recommendations - Engine Oil
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.