Updating the Fuel Filter Group on Certain C27 and C32 Industrial Engines {1261, 1262}
- Industrial Engine:
- C27 (S/N: TWM1-UP)
- C32 (S/N: TLD1-UP)
Description of Change: The current configuration of the fuel filter group utilizes two check valve groups. These two valves cause high fuel pressure diagnostic codes.
Adaptable To: The 228-7381 Check Valve Gp must be removed from the 323-6339 Fuel Filter Gp and replaced with a 309-5131 Plug As .
This change is effective for the serial numbers listed in Table 1.
Show/hide table
| Effective Serial Numbers |
| S/N:TWM3738-UP |
| S/N:TLD1118-UP |
Caterpillar Information System:
NOx Sensors Handling and Installation Procedures {191N} NOx Sensors Handling and Installation Procedures {191N}
C280-16 Engine Model View Illustrations
C27 Generator Set Safety Messages
CG137 Engines Crank But Do Not Start{1000} CG137 Engines Crank But Do Not Start{1000}
C7.1 Engines for Caterpillar Built Machines Gear Group (Front)
C27 Generator Set Declaration of Conformity
C4.4 Industrial Engine Alarms and Shutoffs
3500B Generator Set Engines Generator Coupling
3500B Generator Set Engines Generator Coupling
3500B Generator Set Engines Turbocharger
C9.3B Engines Flywheel Housing Cover
C9.3 Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
C280-16 Engine Safety Messages
C175-16 Locomotive Engine Coolant Temperature Is High
C7.1 Marine Engine Inlet Manifold - Remove and Install
C7.1 Marine Engine Exhaust Manifold - Remove and Install
C32 Marine Engines Exhaust Manifold - Water cooled
C18 Marine Propulsion Engines Piston and Rings
C7.1 Industrial Engine Diagnostic Flash Code Retrieval
C18 Marine Propulsion Engines Camshaft
C32 Marine Engines Electric Starting Motor
C18 Marine Propulsion Engines Cylinder Head Valves
C9.3 Head Tool Improvements{0599, 0701, 0703, 1100} C9.3 Head Tool Improvements{0599, 0701, 0703, 1100}
C7.1 Engines for Caterpillar Built Machines Piston and Rings