Model View Illustrations
Show/hide table
| |
| Illustration 1 | g03357869 |
|
View of the right side of the C280 Engine (1) Shield for the exhaust manifold (2) Cover for the high performance aftercooler (3) Lifting eyes (4) Engine crankcase breathers (5) Air shutoff (6) Exhaust bypass (7) Cover for the turbocharger (8) Engine oil filters (9) Drain valves for the oil filters (10) Engine oil level gauge (11) Engine oil filler tube (12) Centrifugal engine oil filter (13) Circuit breaker box (14) Expansion relief valves for the crankcase (15) Engine control module (16) Fuel filters | |
Show/hide table
| |
| Illustration 2 | g03345398 |
|
View of the left side of the C280 Engine (17) Engine starting motors (air starting) (18) Drain valve for the engine oil pan (19) Integral relay valve for the air starting system (20) Air pressure regulator for the engine starting motors (21) Screen for the air pressure system (22) Fuel priming pump | |
Show/hide table
| |
| Illustration 3 | g03345635 |
|
View of the front of the C280 Engine (23) Turbochargers (24) Engine oil cooler (remote location) (25) Water drains (26) Prelube pump for engine oil (27) Guard for engine crankshaft damper | |
Caterpillar Information System:
C27 Generator Set Safety Messages
CG137 Engines Crank But Do Not Start{1000} CG137 Engines Crank But Do Not Start{1000}
C7.1 Engines for Caterpillar Built Machines Gear Group (Front)
C27 Generator Set Declaration of Conformity
C4.4 Industrial Engine Alarms and Shutoffs
3500B Generator Set Engines Generator Coupling
3500B Generator Set Engines Generator Coupling
3500B Generator Set Engines Turbocharger
C9.3B Engines Flywheel Housing Cover
C9.3 Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
C7.1 Marine Engine Connecting Rod Bearings - Remove and Install - Connecting rods in position
C7.1 Marine Engine Pistons and Connecting Rods - Assemble
NOx Sensors Handling and Installation Procedures {191N} NOx Sensors Handling and Installation Procedures {191N}
2013/02/11 Updating the Fuel Filter Group on Certain C27 and C32 Industrial Engines {1261, 1262}
C280-16 Engine Safety Messages
C175-16 Locomotive Engine Coolant Temperature Is High
C7.1 Marine Engine Inlet Manifold - Remove and Install
C7.1 Marine Engine Exhaust Manifold - Remove and Install
C32 Marine Engines Exhaust Manifold - Water cooled
C18 Marine Propulsion Engines Piston and Rings
C7.1 Industrial Engine Diagnostic Flash Code Retrieval
C18 Marine Propulsion Engines Camshaft
C32 Marine Engines Electric Starting Motor
C18 Marine Propulsion Engines Cylinder Head Valves