Fuel Priming Pump - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Turn OFF the fuel supply to the engine.
Show/hide table
Illustration 1 g03319449 - Disconnect fuel lines (1), harness assembly (2). Remove bolts (3) and fuel priming pump (4).
- Install pump assembly (4) in the reverse order of removal.
- Tighten bolts (3) to a torque of 9 ± 2 N·m (80 ± 18 lb in).
Caterpillar Information System:
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Detonation Occurrence
C32 Marine Engines Sensor Supply - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Temperature Is High
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is Low - Diesel System
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Aftercooler Coolant Temperature Is High
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Inlet Air Is Restricted
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Engine Overspeeds
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Crankcase Pressure Is High
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Coolant Temperature Is High
3500C Marine Engines Accessory Drive (Upper Right Hand)
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Turbocharger Turbine Temperature Is High
C175-16 Generator Set Engine Electronic Control Module (ECM)
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000} 420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
2012/11/09 Improved Jacket Water Heater Now Available For Certain Generator Sets {1383}
3512B and 3512C Petroleum Generator Set Engines Air Shutoff
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Cylinder Head
3500B High Displacement Air Inlet and Exhaust Lines
3500C Marine Engines Accessory Drive (Upper Left Hand)
3500B Engines Exhaust Manifold
3500B High Displacement Exhaust Manifold
3500B High Displacement Air Inlet and Exhaust Lines
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Detonation - Test
2012/11/14 A New Shutoff Solenoid Is Now Used on Certain 3408 and 3412 Engines {7418}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Timing - Calibrate