3500C Marine Engines Caterpillar


Accessory Drive (Upper Left Hand)

Usage:

3512C 2A2


Illustration 1g03319633


Illustration 2g03319639
Left side view

Table 1
Specification for 424-9760 Accessory Drive Gp 
Item  Qty  Part  Specification description 
7N-5874 Auxiliary Drive Shaft  Diameter is 74.900 ± 0.015 mm (2.9488 ± 0.0006 inch)
Width of the groove in the new auxiliary drive shaft for the thrust washer is 8.75 ± 0.10 mm (0.344 ± 0.004 inch).
7N-5279 Adapter As  Inside diameter of the 127-5400 Bushing after assembly in the adapter assembly is 75.000 ± 0.055 mm (2.9528 ± 0.0022 inch)
7N-7539 Thrust Washer  Thickness of the new thrust washer is 8.50 ± 0.05 mm (0.335 ± 0.002 inch)
235-3546 O-Ring Seal  Lightly lubricate the bore with the lubricant that is being sealed. 

Caterpillar Information System:

3500B High Displacement Air Inlet and Exhaust Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Cylinder Head
3512B and 3512C Petroleum Generator Set Engines Air Shutoff
2012/11/09 Improved Jacket Water Heater Now Available For Certain Generator Sets {1383}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000} 420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
3516B Engine Fuel Priming Pump - Remove and Install
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Detonation Occurrence
C32 Marine Engines Sensor Supply - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Temperature Is High
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is Low - Diesel System
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Aftercooler Coolant Temperature Is High
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Inlet Air Is Restricted
3500B Engines Exhaust Manifold
3500B High Displacement Exhaust Manifold
3500B High Displacement Air Inlet and Exhaust Lines
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Detonation - Test
2012/11/14 A New Shutoff Solenoid Is Now Used on Certain 3408 and 3412 Engines {7418}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Timing - Calibrate
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Direct Fuel Control Mode - Test
421-9728 Top End Engine Overhaul Kit for 3412E Marine Engines{1000} 421-9728 Top End Engine Overhaul Kit for 3412E Marine Engines{1000}
C32 Marine Engines Speed/Timing - Test
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator Response - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Exhaust Temperature Is High
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.