Air Inlet and Exhaust Lines
Show/hide table
| |
| Illustration 1 | g03319641 |
Show/hide table
| Specification for 385-6712 Air Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 0S-1573 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g03319656 |
Show/hide table
| |
| Illustration 3 | g03319659 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 2 | 8 | 6V-5103 O-Ring Seal | Before assembly, lightly lubricate the bore. |
| 3 | 16 | 6V-5101 O-Ring Seal | |
| 4 | 2 | 6V-3968 O-Ring Seal | |
| 5 | 12 | 9F-2773 Bolt | Use the following procedure in order to assemble the aftercooler assembly and tighten the bolts:
1. Assemble the seals to the aftercooler core. 2. Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal. 3. Assemble the aftercooler with seals to the inlet manifold. 4. Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess. 5. Install the aftercooler cover. 6. Inspect the upper seal in order to ensure that the seal is seating correctly in the recess. 7. Install the cover bolts. Hand tighten the cover bolts. 8. Tighten the bolts in a numerical sequence as shown in Illustration 3 to 9. Again, tighten the bolts in a numerical sequence that is shown in Illustration 3 to 10. Remove the tape. |
Caterpillar Information System:
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Cylinder Head
3512B and 3512C Petroleum Generator Set Engines Air Shutoff
2012/11/09 Improved Jacket Water Heater Now Available For Certain Generator Sets {1383}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000} 420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
3516B Engine Fuel Priming Pump - Remove and Install
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Detonation Occurrence
C32 Marine Engines Sensor Supply - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Temperature Is High
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is Low - Diesel System
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Aftercooler Coolant Temperature Is High
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Inlet Air Is Restricted
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Engine Overspeeds
3500C Marine Engines Accessory Drive (Upper Left Hand)
3500B Engines Exhaust Manifold
3500B High Displacement Exhaust Manifold
3500B High Displacement Air Inlet and Exhaust Lines
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Detonation - Test
2012/11/14 A New Shutoff Solenoid Is Now Used on Certain 3408 and 3412 Engines {7418}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Timing - Calibrate
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Direct Fuel Control Mode - Test
421-9728 Top End Engine Overhaul Kit for 3412E Marine Engines{1000} 421-9728 Top End Engine Overhaul Kit for 3412E Marine Engines{1000}
C32 Marine Engines Speed/Timing - Test
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator Response - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Exhaust Temperature Is High