New Plugs Are Available for Reconditioning the Water Ferrules in 3500 Engine Blocks {1201}
- Caterpillar Products: Machine Engines
- All 3500 Series
ReferenceReuse And Salvage Guidelines, SEBF8255, "Procedure to Salvage Top Decks of Cylinder Blocks of 3500 Engines"
Show/hide table
 | |
| Illustration 1 | g03303436 |
(1) 417-3778 Plug (2) 417-3779 Plug | |
The new 417-3778 Plug replaces the former 332-4535 Plug. which is canceled.
The new 417-3779 Plug replaces the former 332-4533 Plug. which is canceled.
Each new plug has a 30 degree radius rather than the chamfer in the former plugs in order to ease installation.
For information on using the plugs, refer to the publication that is referenced above.
Caterpillar Information System:
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206} Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
C175-16 PETROLEUM ENGINES Bearing Clearance - Check
3508B, 3512B, and 3516B High Displacement Generator Sets Maintenance Interval Schedule - Standby
C175-16 PETROLEUM ENGINES Piston Cooling Jets - Remove and Install
New Engine Software Is Available for Certain Tier 4 Interim C9.3 Through C15 Machine Engines and C9.3 Through C18 Industrial Engines {1920} New Engine Software Is Available for Certain Tier 4 Interim C9.3 Through C15 Machine Engines and C9.3 Through C18 Industrial Engines {1920}
C175-16 PETROLEUM ENGINES Gear Group (Rear) - Remove and Install
2012/11/01 Inspection of RS485 Remote Annunciator Interface Harness On Certain 3500 Generator Sets {1408, 4490, 7400}
C175-16 PETROLEUM ENGINES Idler Gears (Front) - Remove and Install
3500 Engines Air Starting Motor
3500 Engines Air Starting Motor
C175-16 Engine Sensor Signal (Analog, Active) - Test
2013/10/31 New Exhaust Components Are Used on Certain 3500B and 3500C Engines {1059}
C175-16 Generator Set Engine Connecting Rod Bearings - Remove and Install
C175-16 Generator Set Engine Crankshaft Main Bearings - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Aftercooler Core - Inspect/Clean/Test
3508B, 3512B, and 3516B High Displacement Generator Sets Coolant (DEAC) - Change
3508B, 3512B, and 3516B High Displacement Generator Sets Coolant (ELC) - Change
C3.3B and C3.8 Engines for Caterpillar Built Machines Starting Aid - Test
2012/12/11 A New Wastegate Bellows and Gaskets Are Used On Certain 3500C Marine Engines {1059}
3512C SR4B Generator Sets Engine Oil and Filter - Change
3508B, 3512B, and 3516B High Displacement Generator Sets Coolant Extender (ELC) - Add
C175-16 PETROLEUM ENGINES Pistons, Liners, and Connecting Rods - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Coolant Level - Check
3508B, 3512B, and 3516B High Displacement Generator Sets Coolant Sample (Level 1) - Obtain