Piston Cooling Jets - Remove and Install
- 将蓄电池断路开关转到断开位置。
- 如有必要,拆卸部件以接近侧盖。
Show/hide table
注意 保持所有零件清洁无杂质。
杂质会造成快速磨损並縮短部件使用寿命。
Show/hide table图 1 g01206105 - 拆下螺栓 (1 )。 拆下侧盖 (2)。
Show/hide table
图 2 g02400820 - 转动发动机以将活塞朝上止点定位,从而易于接近。 请参阅测试和调整, "找到 1 号活塞上止点位置"。
- 拆下螺栓 (3 )。 拆下活塞冷却喷嘴 (4)。 标记定位销 (5) 的位置。
- 对于其余的活塞冷却喷嘴,重复步骤 2 至 5。
- 按与拆卸相反的顺序安装活塞冷却喷嘴 (4)。
Caterpillar Information System:
New Engine Software Is Available for Certain Tier 4 Interim C9.3 Through C15 Machine Engines and C9.3 Through C18 Industrial Engines {1920} New Engine Software Is Available for Certain Tier 4 Interim C9.3 Through C15 Machine Engines and C9.3 Through C18 Industrial Engines {1920}
C175-16 PETROLEUM ENGINES Gear Group (Rear) - Remove and Install
2012/11/01 Inspection of RS485 Remote Annunciator Interface Harness On Certain 3500 Generator Sets {1408, 4490, 7400}
C175-16 PETROLEUM ENGINES Idler Gears (Front) - Remove and Install
3500 Engines Air Starting Motor
3500 Engines Air Starting Motor
C175-16 Engine Sensor Signal (Analog, Active) - Test
2013/10/31 New Exhaust Components Are Used on Certain 3500B and 3500C Engines {1059}
3500C Marine Engines Air Starting Motor
C175-16 PETROLEUM ENGINES Flywheel Housing - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C175-16 PETROLEUM ENGINES Crankshaft Rear Seal - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Maintenance Interval Schedule - Standby
C175-16 PETROLEUM ENGINES Bearing Clearance - Check
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206} Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
2012/10/18 New Plugs Are Available for Reconditioning the Water Ferrules in 3500 Engine Blocks {1201}
C175-16 Generator Set Engine Connecting Rod Bearings - Remove and Install
C175-16 Generator Set Engine Crankshaft Main Bearings - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Aftercooler Core - Inspect/Clean/Test
3508B, 3512B, and 3516B High Displacement Generator Sets Coolant (DEAC) - Change
3508B, 3512B, and 3516B High Displacement Generator Sets Coolant (ELC) - Change
C3.3B and C3.8 Engines for Caterpillar Built Machines Starting Aid - Test
2012/12/11 A New Wastegate Bellows and Gaskets Are Used On Certain 3500C Marine Engines {1059}
3512C SR4B Generator Sets Engine Oil and Filter - Change