Air Starting Motor
Show/hide table
图 1 | g03302396 |
Show/hide table
技术规格 - 392-1008 空气起动马达总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 1 | 149-3996 管螺纹接头 | 装配前,将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
2 | 2 | 6B-3685 弯头 | 装配前,将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
3 | 1 | 6K-1972 扩口弯头 | 装配前,将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
4 | 1 | 4M-5317 过渡衬套 | 装配前,将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
5 | 2 | 3L-8993 接头 | 装配前,将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
6 | 1 | 2L-2811 接头 | 装配前,将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
7 | 1 | 5B-7666 弯头 | 装配前,将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
Caterpillar Information System:
C175-16 Engine Sensor Signal (Analog, Active) - Test
2013/10/31 New Exhaust Components Are Used on Certain 3500B and 3500C Engines {1059}
3500C Marine Engines Air Starting Motor
C175-16 PETROLEUM ENGINES Flywheel Housing - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C175-16 PETROLEUM ENGINES Crankshaft Rear Seal - Remove and Install
C175-16 PETROLEUM ENGINES Flywheel - Remove and Install
2012/11/26 A New Heat Shield and Related Components Are Used On Certain C9.3 Commercial Engines {1000}
C175-16 Generator Set Engine Crankshaft Front Seal - Remove and Install
C175-16 Generator Set Engine Vibration Damper - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Maintenance Interval Schedule - Prime Power
2013/01/09 Improved Cross-Tie Bolts Are Now Used on Certain C27 and C32 Commercial Engines {1201, 7553}
3500 Engines Air Starting Motor
C175-16 PETROLEUM ENGINES Idler Gears (Front) - Remove and Install
2012/11/01 Inspection of RS485 Remote Annunciator Interface Harness On Certain 3500 Generator Sets {1408, 4490, 7400}
C175-16 PETROLEUM ENGINES Gear Group (Rear) - Remove and Install
New Engine Software Is Available for Certain Tier 4 Interim C9.3 Through C15 Machine Engines and C9.3 Through C18 Industrial Engines {1920} New Engine Software Is Available for Certain Tier 4 Interim C9.3 Through C15 Machine Engines and C9.3 Through C18 Industrial Engines {1920}
C175-16 PETROLEUM ENGINES Piston Cooling Jets - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Maintenance Interval Schedule - Standby
C175-16 PETROLEUM ENGINES Bearing Clearance - Check
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206} Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
2012/10/18 New Plugs Are Available for Reconditioning the Water Ferrules in 3500 Engine Blocks {1201}
C175-16 Generator Set Engine Connecting Rod Bearings - Remove and Install
C175-16 Generator Set Engine Crankshaft Main Bearings - Remove and Install