Air Starting Motor
Show/hide table
| 图 1 | g03335104 |
Show/hide table
| 技术规格 - 424-9805 空气起动马达总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 6B-3685 弯头 | 装配前，将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
| 2 | 2 | 5B-7643 管螺纹接头 | 装配前，将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
| 3 | 1 | 3B-6492 管接头 | 装配前，将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
| 4 | 1 | 2L-2811 接头 | 装配前，将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
| 5 | 1 | 5B-7666 弯头 | 装配前，将白色 Loctite Low Breakloose PST 涂覆到螺纹上。 |
| 6 | 1 | 3L-8993 接头 | 装配前，将白色 Loctite Low Breakloose PST 涂覆到螺纹上。
仅在阀至螺纹接头处涂抹高强度或高温厌氧法兰密封剂。 |
| 7 | 1 | 6K-1972 扩口弯头 | 如图 1 所示，与进气管成 75 ± 10 度角放置弯头。 |
| 8 | 1 | 2L-2811 接头 | 装配前，将白色 Loctite Low Breakloose PST 涂覆到螺纹上。
仅在阀至螺纹接头处涂抹高强度或高温厌氧法兰密封剂。 |
Caterpillar Information System:
3500 Engines Air Starting Motor
C175-16 Engine Sensor Signal (Analog, Active) - Test
2013/10/31 New Exhaust Components Are Used on Certain 3500B and 3500C Engines {1059}
3500C Marine Engines Air Starting Motor
C175-16 PETROLEUM ENGINES Flywheel Housing - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C175-16 PETROLEUM ENGINES Crankshaft Rear Seal - Remove and Install
C175-16 PETROLEUM ENGINES Flywheel - Remove and Install
2012/11/26 A New Heat Shield and Related Components Are Used On Certain C9.3 Commercial Engines {1000}
C175-16 Generator Set Engine Crankshaft Front Seal - Remove and Install
C175-16 Generator Set Engine Vibration Damper - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Maintenance Interval Schedule - Prime Power
C175-16 PETROLEUM ENGINES Idler Gears (Front) - Remove and Install
2012/11/01 Inspection of RS485 Remote Annunciator Interface Harness On Certain 3500 Generator Sets {1408, 4490, 7400}
C175-16 PETROLEUM ENGINES Gear Group (Rear) - Remove and Install
New Engine Software Is Available for Certain Tier 4 Interim C9.3 Through C15 Machine Engines and C9.3 Through C18 Industrial Engines {1920} New Engine Software Is Available for Certain Tier 4 Interim C9.3 Through C15 Machine Engines and C9.3 Through C18 Industrial Engines {1920}
C175-16 PETROLEUM ENGINES Piston Cooling Jets - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Maintenance Interval Schedule - Standby
C175-16 PETROLEUM ENGINES Bearing Clearance - Check
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206} Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
2012/10/18 New Plugs Are Available for Reconditioning the Water Ferrules in 3500 Engine Blocks {1201}
C175-16 Generator Set Engine Connecting Rod Bearings - Remove and Install
C175-16 Generator Set Engine Crankshaft Main Bearings - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Aftercooler Core - Inspect/Clean/Test