Cylinder Liner - Install
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| B | 2P-8260 | 缸套安装器 | 1 |
| C | 207-1601 | 橡胶润滑剂 | - |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 检查缸套突出量。 请参阅测试和调整, "缸套突出量 - 检查"。
Show/hide table
图 1 g01149469 - 将缸套密封 (3) 安装在缸套 (1) 上。
- 缸套孔表面和缸套密封件上 (3) 使用工具 (C)。
- 把加注口带箍 (2) 在清洁的发动机机油中浸泡一会儿。 然后立刻将加注口箍带安装到缸套上。
- 使用工具 (B) 来把缸套 (1) 安装到缸体中。 确保一切与缸套凸出量有关的标记都要校准。
结束:
- 安装活塞和连杆。 请参阅拆解和组装, "活塞和连杆 - 安装"。
Caterpillar Information System:
2012/10/08 Check Valves Are Now Used in the Fuel System of Certain Electric Power Generation and Industrial Engines {1250, 1261, 5067}
C32 Marine Engines Cylinder Liner - Remove
C175-16 Generator Set Engine Fuel Pump (High Pressure) - Remove and Install
2012/10/24 A New Water Temperature Regulator Is Available for Certain Commercial Engines {1355}
C175-16 Generator Set Engine Fuel Control Valve - Remove and Install - Primary
C175-16 PETROLEUM ENGINES Flow Limiter - Remove and Install
C32 Marine Engines Camshaft Bearings - Install
C175-16 Generator Set Engine High Pressure Fuel Rails - Remove and Install
C32 Marine Engines Camshaft Bearings - Remove
C1.5 and C2.2 Industrial Engines Exhaust Has Excessive White Smoke
C32 Marine Engines Unit Injector - Remove
C175-16 Generator Set Engine Fuel Transfer Pump - Remove and Install
C32 Marine Engines Piston Cooling Jets - Remove and Install
C32 Marine Engines Inlet and Exhaust Valves - Remove and Install
C32 Marine Engines Pistons and Connecting Rods - Remove
C175-16 Generator Set Engine Air Cleaner - Remove and Install
C32 Marine Engines Pistons and Connecting Rods - Install
C32 Marine Engines Pistons and Connecting Rods - Disassemble
C32 Marine Engines Pistons and Connecting Rods - Assemble
C32 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
C175-16 Generator Set Engine Turbocharger - Remove and Install
2012/10/03 A New Valve Lifter Assembly Is Used in 3500B Engines {1209}
C32 Marine Engines Engine Oil Filter Base - Remove
2012/10/30 A New Valve Lifter Assembly Is Used in 3500B and 3500C Engines {1209}