Camshaft Bearings - Remove
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 8S-2241 | 凸轮轴轴承工具总成 | 1 |
B | 9U-7222 | 凸轮轴轴承导向器 | 1 |
8M-8778 | 锥形锁紧螺柱 1/2 - 13 X 1 9/16 in |
1 | |
C | 9U-7210 | 拉拔器盘 | 1 |
开始:
- 拆下凸轮轴。 请参阅拆解和组装, "凸轮轴 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 拆下 7 号凸轮轴轴承(后)。 按从发动机后部到前部的顺序操作。
- 将工具 (B) 的小端安装到凸轮轴轴承 (1) 中。
- 将工具 (C) 置于工具 (A) 的上方。 穿过缸盖,把工具 (A) 安装到工具 (B) 上。
注: 工具 (C) 安装在缸盖外面。 需要用到工具 (C) 来从缸盖上拆下所有的凸轮轴轴承。
- 使用工具 (A) 将凸轮轴轴承 (1) 从缸盖上拆下。
- 将工具 (B) 从工具 (A) 上拆下,然后拆下凸轮轴轴承。
Show/hide table
图 1 | g01159745 |
Caterpillar Information System:
C1.5 and C2.2 Industrial Engines Exhaust Has Excessive White Smoke
C32 Marine Engines Unit Injector - Remove
C175-16 Generator Set Engine Fuel Transfer Pump - Remove and Install
C32 Marine Engines Unit Injector - Install
C175-16 Generator Set Engine Fuel Priming Pump - Remove and Install
2012/11/12 A New Seat Kit is Now Available for Certain Excavators and Mobile Hydraulic Power Units {7312}
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Has Excessive Black Smoke
C175-16 Generator Set Engine Fuel Filter Housing - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Vibration Is Excessive
C175-16 Generator Set Engine Electronic Control Module (Engine) - Remove and Install
C1.5 and C2.2 Industrial Engines Engine Top Speed Is Not Obtained
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Stalls at Low RPM
C175-16 Generator Set Engine High Pressure Fuel Rails - Remove and Install
C32 Marine Engines Camshaft Bearings - Install
C175-16 PETROLEUM ENGINES Flow Limiter - Remove and Install
C175-16 Generator Set Engine Fuel Control Valve - Remove and Install - Primary
2012/10/24 A New Water Temperature Regulator Is Available for Certain Commercial Engines {1355}
C175-16 Generator Set Engine Fuel Pump (High Pressure) - Remove and Install
C32 Marine Engines Cylinder Liner - Remove
2012/10/08 Check Valves Are Now Used in the Fuel System of Certain Electric Power Generation and Industrial Engines {1250, 1261, 5067}
C32 Marine Engines Cylinder Liner - Install
C32 Marine Engines Piston Cooling Jets - Remove and Install
C32 Marine Engines Inlet and Exhaust Valves - Remove and Install
C32 Marine Engines Pistons and Connecting Rods - Remove