Electronic Control Module (Engine) - Remove and Install
- Remove bolts (1) from both sides of box (3). Remove cover (2).
Show/hide table
Illustration 2 g01522788 - Disconnect harness assemblies (6) and (7). Remove bolts (4). Remove electronic control module (5).
Show/hide table
| |
| Illustration 1 | g01522787 |
- Position electronic control module (5). Install bolts (4). Connect harness assemblies (6) and (7). Tighten the connectors for harness assemblies (6) and (7) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .Show/hide table
Illustration 4 g01522787 - Install cover (2) onto box (3). Install bolts (1) on both sides of box (3).
Show/hide table
| |
| Illustration 3 | g01522788 |
Caterpillar Information System:
C1.5 and C2.2 Industrial Engines Engine Top Speed Is Not Obtained
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Stalls at Low RPM
Alternator - Bosch K1/N1 Insulated Screw - Check
C1.5 and C2.2 Industrial Engines Engine Speed Does Not Change
Alternator - Bosch K1/N1 Residual Magnetism - Restore
G3520E Generator Set Engines Engine Oil Filter
G3516C and G3516E Gas Engines Cylinder Head Valves
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Shutdown Occurs Intermittently
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Overspeeds
C1.5 and C2.2 Industrial Engines Engine Misfires, Runs Rough or Is Unstable
G3520E Generator Set Engines Exhaust Manifold
G3516H and G3520H Generator Set Engines Pressure Sensor - Fuel Differential
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Vibration Is Excessive
C175-16 Generator Set Engine Fuel Filter Housing - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Has Excessive Black Smoke
2012/11/12 A New Seat Kit is Now Available for Certain Excavators and Mobile Hydraulic Power Units {7312}
C175-16 Generator Set Engine Fuel Priming Pump - Remove and Install
C32 Marine Engines Unit Injector - Install
C175-16 Generator Set Engine Fuel Transfer Pump - Remove and Install
C32 Marine Engines Unit Injector - Remove
C1.5 and C2.2 Industrial Engines Exhaust Has Excessive White Smoke
C32 Marine Engines Camshaft Bearings - Remove
C175-16 Generator Set Engine High Pressure Fuel Rails - Remove and Install
C32 Marine Engines Camshaft Bearings - Install