Engine Oil Filter
Show/hide table
| |
| Illustration 1 | g03266520 |
|
Right side view of engine | |
Show/hide table
| |
| Illustration 2 | g03266522 |
|
Rear view of engine | |
Show/hide table
| Specification for 200-6420 Engine Oil Filter Gp, 209-3427 Engine Oil Filter Gp and 236-5198 Engine Oil Filter Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 7N-7697 Plunger | Cooling jet sequence valves must start to open at a pressure difference of Cooling jet sequence valves must be fully open at a pressure difference of |
| 2 | 2 | 6B-9202 Spring | Length under test force is Test force is Free length after test is |
| 3 | 1 | 2W-1053 Plug | Torque to |
| 4 | 4 | 109-2332 O-Ring Seal | Before assembly, lubricate the bore lightly with the lubricant that is being sealed. |
| 5 | 4 | 275-2604 Engine Oil Filter | Tighten the engine oil filter element onto the mounting base until the sealing surface contacts the base. Then tighten the engine oil filter element for an additional one full turn. |
| 6 | 4 | 7G-6713 Spring | Length under test force is Test force is Free length after test is |
| 7 | 4 | 1P-1367 Plunger | Bypass valve must start to open at a pressure difference of The plunger must move freely in the bore. |
Caterpillar Information System:
G3516C and G3516E Gas Engines Cylinder Head Valves
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Shutdown Occurs Intermittently
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Overspeeds
C1.5 and C2.2 Industrial Engines Engine Misfires, Runs Rough or Is Unstable
G3520E Generator Set Engines Exhaust Manifold
G3516H and G3520H Generator Set Engines Pressure Sensor - Fuel Differential
G3520E Generator Set Engines Pressure Sensor
G3516H and G3520H Generator Set Engines Temperature Sensor - Thermocouple
G3516H and G3520H Generator Set Engines Temperature Sensor - Thermocouple
793F and 797F Off-Highway Trucks Power Train Electronic Control System Event Code List
349F and 352F Excavators Additional Messages
2012/10/26 New Exhaust Bellows Are Used on Certain 3512C. 3516B. and 3516C Marine Engines {1059}
Alternator - Bosch K1/N1 Residual Magnetism - Restore
C1.5 and C2.2 Industrial Engines Engine Speed Does Not Change
Alternator - Bosch K1/N1 Insulated Screw - Check
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Stalls at Low RPM
C1.5 and C2.2 Industrial Engines Engine Top Speed Is Not Obtained
C175-16 Generator Set Engine Electronic Control Module (Engine) - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Vibration Is Excessive
C175-16 Generator Set Engine Fuel Filter Housing - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Has Excessive Black Smoke
2012/11/12 A New Seat Kit is Now Available for Certain Excavators and Mobile Hydraulic Power Units {7312}
C175-16 Generator Set Engine Fuel Priming Pump - Remove and Install
C32 Marine Engines Unit Injector - Install