Inlet and Exhaust Valve Guides - Remove and Install
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A(1) | 9U-6895 | 气门导管冲头 | 1 |
Show/hide table
| (1) | 部分 9U-7530 发动机工具总成 |
开始:
- 拆下进气门和排气门。
- 从气门导管 (2) 上拆下气门杆密封 (1)。
- 使用工具 (A) 和锤子从缸盖上拆下气门导管。
Show/hide table
| |
| 图 1 | g01073841 |
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A(1) | 9U-6895 | 气门导管冲头 | 1 |
| B(1) | 9U-6894 | 导向圈 | 1 |
Show/hide table
| (1) | 部分 9U-7530 发动机工具总成 |
Show/hide table
| |
| 图 2 | g01073842 |
- 用清洁的发动机机油润滑气门导管的孔。
- 用工具 (A) 和工具 (B) 将气门导管 (2) 安装到缸盖中。
注: 必须使用工具 (B) 将气门导管安装到正确高度。
从缸盖表面到气门导管顶部的高度 ...
35.00 ± 0.50 mm (1.378 ± 0.020 inch) 注: 有关详细信息，请参阅规格缸盖, "气门"。
- 将气门杆密封 (1) 安装到气门导管上。
结束:
- 安装进气门和排气门。
Caterpillar Information System:
C32 Marine Engines Pistons and Connecting Rods - Assemble
C32 Marine Engines Pistons and Connecting Rods - Disassemble
C32 Marine Engines Pistons and Connecting Rods - Install
C175-16 Generator Set Engine Air Cleaner - Remove and Install
C32 Marine Engines Pistons and Connecting Rods - Remove
C32 Marine Engines Inlet and Exhaust Valves - Remove and Install
C32 Marine Engines Piston Cooling Jets - Remove and Install
C32 Marine Engines Cylinder Liner - Install
2012/10/08 Check Valves Are Now Used in the Fuel System of Certain Electric Power Generation and Industrial Engines {1250, 1261, 5067}
C32 Marine Engines Cylinder Liner - Remove
C175-16 Generator Set Engine Fuel Pump (High Pressure) - Remove and Install
2012/10/24 A New Water Temperature Regulator Is Available for Certain Commercial Engines {1355}
C175-16 Generator Set Engine Turbocharger - Remove and Install
2012/10/03 A New Valve Lifter Assembly Is Used in 3500B Engines {1209}
C32 Marine Engines Engine Oil Filter Base - Remove
2012/10/30 A New Valve Lifter Assembly Is Used in 3500B and 3500C Engines {1209}
C32 Marine Engines Engine Oil Filter Base - Disassemble
2012/10/03 Importance of Proper Valve Lash Setting {1102, 1121, 1123, 1209}
2012/10/04 Importance of Proper Valve Lash Setting {1102, 1121, 1123}
C32 Marine Engines Engine Oil Filter Base - Assemble
C32 Marine Engines Engine Oil Filter Base - Install
C32 Marine Engines Engine Oil Cooler - Remove
C32 Marine Engines Engine Oil Cooler - Install
C175-16 Generator Set Engine Aftercooler - Remove and Install