Engine Oil Cooler - Remove
Removal Procedure
Start By:
- Remove the engine oil filter base.
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
- Remove four bolts (17) , bonnet (6) , and the O-ring seals.
Show/hide table
Illustration 1 | g01362393 |
- Remove bolts (3) and tube assembly (4) .
- Remove bolts (16) and (15) , and elbow (14) .
- Lower tube assembly (13) .
- Remove bolts (10) . Remove tube assembly (11) .
- Disconnect tube assembly (7) .
- Remove bolts (1) .
- Remove bonnet (2) .
- Remove bolts (8) and (9) , and elbow (12) from engine oil cooler (5) . Remove engine oil cooler (5) .
Caterpillar Information System:
C32 Marine Engines Engine Oil Filter Base - Install
C32 Marine Engines Engine Oil Filter Base - Assemble
2012/10/04 Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/03 Importance of Proper Valve Lash Setting {1102, 1121, 1123, 1209}
C32 Marine Engines Engine Oil Filter Base - Disassemble
2012/10/30 A New Valve Lifter Assembly Is Used in 3500B and 3500C Engines {1209}
C32 Marine Engines Engine Oil Filter Base - Remove
2012/10/03 A New Valve Lifter Assembly Is Used in 3500B Engines {1209}
C175-16 Generator Set Engine Turbocharger - Remove and Install
C32 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
C32 Marine Engines Pistons and Connecting Rods - Assemble
C32 Marine Engines Pistons and Connecting Rods - Disassemble
C32 Marine Engines Engine Oil Cooler - Install
C175-16 Generator Set Engine Aftercooler - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Contains Water
C1.5 and C2.2 Engines for Caterpillar Built Machines Inlet Air Temperature Is High
3512E Tier 4 Final Engines for Land Electric Drilling Water Pump
C1.5 and C2.2 Engines for Caterpillar Built Machines Oil Consumption Is Excessive
C1.5 and C2.2 Engines for Caterpillar Built Machines Oil Contains Coolant
C1.5 and C2.2 Engines for Caterpillar Built Machines Oil Contains Fuel
C1.5 and C2.2 Engines for Caterpillar Built Machines Oil Pressure Is Low
C280-12 Marine Engine Marine Control Module System Overview
C175-16 Generator Set Engine Air Inlet Manifold - Remove and Install