C175-16 Generator Set Engine Caterpillar


Air Cleaner - Remove and Install

Usage:

C175-16 WYC

Removal Procedure



    Illustration 1g01205877

  1. Release clamps (1). Remove cover (2).


    Illustration 2g01205880

  2. Remove air cleaner element (3).


    Illustration 3g01205881

  3. Loosen clamp (4). Remove bolts (6) on each side of air cleaner housing (5). Remove air cleaner housing (5).

  4. Repeat Steps 1 through 3 for the remaining air cleaners.

Installation Procedure



    Illustration 4g01205881

  1. Position air cleaner housing (5). Install bolts (6) on each side of air cleaner housing (5). Tighten clamp (4).


    Illustration 5g01205880

  2. Install air cleaner element (3).


    Illustration 6g01205877

  3. Install cover (2). Secure clamps (1).

Caterpillar Information System:

C32 Marine Engines Pistons and Connecting Rods - Remove
C32 Marine Engines Inlet and Exhaust Valves - Remove and Install
C32 Marine Engines Piston Cooling Jets - Remove and Install
C32 Marine Engines Cylinder Liner - Install
2012/10/08 Check Valves Are Now Used in the Fuel System of Certain Electric Power Generation and Industrial Engines {1250, 1261, 5067}
C32 Marine Engines Cylinder Liner - Remove
C175-16 Generator Set Engine Fuel Pump (High Pressure) - Remove and Install
2012/10/24 A New Water Temperature Regulator Is Available for Certain Commercial Engines {1355}
C175-16 Generator Set Engine Fuel Control Valve - Remove and Install - Primary
C175-16 PETROLEUM ENGINES Flow Limiter - Remove and Install
C32 Marine Engines Camshaft Bearings - Install
C175-16 Generator Set Engine High Pressure Fuel Rails - Remove and Install
C32 Marine Engines Pistons and Connecting Rods - Install
C32 Marine Engines Pistons and Connecting Rods - Disassemble
C32 Marine Engines Pistons and Connecting Rods - Assemble
C32 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
C175-16 Generator Set Engine Turbocharger - Remove and Install
2012/10/03 A New Valve Lifter Assembly Is Used in 3500B Engines {1209}
C32 Marine Engines Engine Oil Filter Base - Remove
2012/10/30 A New Valve Lifter Assembly Is Used in 3500B and 3500C Engines {1209}
C32 Marine Engines Engine Oil Filter Base - Disassemble
2012/10/03 Importance of Proper Valve Lash Setting {1102, 1121, 1123, 1209}
2012/10/04 Importance of Proper Valve Lash Setting {1102, 1121, 1123}
C32 Marine Engines Engine Oil Filter Base - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.