Service Tools
The following service tools should be used to aid in the troubleshooting of the alternator charging system.
Show/hide table
Service Tools     | |
---|---|
Part Number     | Description     |
6V-7070     | Digital Multimeter     |
9U-7330     | Digital Multimeter     |
146-4080     | Digital Multimeter Gp     |
6V-2150     | Starting and Charging Analyzer     |
9U-5795     | Current Probe     |
225-8266     | Ammeter Tool Gp     |
-     | Variable DC Power Supply 30VDC / 10A     |
Show/hide table
Illustration 1 | g00598763 |
6V-7070 Digital Multimeter |
Show/hide table
Illustration 2 | g00728126 |
9U-7330 Digital Multimeter |
Show/hide table
Illustration 3 | g00728144 |
Variable DC power supply |
Show/hide table
Illustration 4 | g02231196 |
225-8266 Ammeter Tool Gp |
Caterpillar Information System:
Alternator - Bosch K1/N1 General Information
C18 Marine Engine Plate Locations and Film Locations
C18 Marine Engine Crankshaft Vibration Damper - Inspect
Installation Procedure for Product LinkTM PLE640 Systems{7606} Installation Procedure for Product LinkTM PLE640 Systems{7606}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Engagement Pressure for the Transmission Clutch - Calibrate
G3512H and G3516H Generator Set Engines Transfer Gearbox - Install
G3512H and G3516H Generator Set Engines Transfer Gearbox - Remove
C2.6 and C3.3B Engines for Caterpillar Built Machines Electric Starting Motor
C2.6 and C3.3B Engines for Caterpillar Built Machines Alternator and Regulator
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
C1.5 and C2.2 Industrial Engines Multiposition Switch Setup
C175-16 Engine Turbocharger Turbine Temperature Is High
C1.5 and C2.2 Industrial Engines Customer Specified Parameters
Alternator - Bosch K1/N1 Diode Assembly - Test
C1.5 and C2.2 Engines for Caterpillar Built Machines System Configuration Parameters
C1.5 and C2.2 Engines for Caterpillar Built Machines Replacing the ECM
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Level - Test
C18 Marine Engine Coolant Level - Check
C32 Auxiliary Engine Derating Strategy
C1.5 and C2.2 Engines for Caterpillar Built Machines Flash Programming
C1.5 and C2.2 Industrial Engines Acceleration Is Poor or Throttle Response Is Poor
C1.5 and C2.2 Industrial Engines Engine Speed/Timing Sensor Circuit - Test
C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator Is Noisy
C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator Problem