Turbocharger
Show/hide table
| |
| Illustration 1 | g03205516 |
Show/hide table
| Specification for 379-5297 Turbocharger Gp | |||
| Item | Qty | Part | Specification description |
| 1 | 2 | 7W-2297 Clamp As | Use the following procedure to tighten the clamp assemblies: 1. Tighten the clamp assemblies to 2. Gently hit around the clamp assemblies with a soft hammer. 3. Again, tighten the clamp assemblies to |
| 2 | 16 | 6V-2751 High Temperature Bolt | Tighten the bolts to |
| 3 | 8 | 168-7800 Locknut | Before assembly, apply Loctite C5A copper anti-seize to threads and bearing surfaces.
Torque to |
Caterpillar Information System:
G3500 Engines Cylinder Block
G3500 Engines Turbocharger
G3500 Engines Cylinder Block
G3500 Engines Turbocharger
C175-16 Locomotive Engine Fuel Control - Test
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425} Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
349F and 352F Excavators Towing the Machine
G3500 Engines Turbocharger
2012/09/27 New Air Tubes for the Exhaust Balance Valve Are Used on Certain C13 Industrial Engines {1052}
3500B Industrial Engine Maintenance Interval Schedule
Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714} Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714}
2012/10/24 A New Fuel Pump Assembly Is Used in the Fuel Transfer Pump Group on C175-16 Engines {1256}
G3500 Engines Cylinder Block
G3500 Engines Exhaust Manifold - Water Cooled
3512B and 3512C Petroleum Generator Set Engines Prelube Pump
2012/08/30 Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
G3500 Engines Exhaust Manifold - Water Cooled
2012/09/17 A New Unit Injector Hydraulic Pump Group Is Available for Certain C9 Commercial Engines {1714}
CX48-P2300 Petroleum Transmission Transmission Oil Filter (Transmission)
C175-16 Locomotive Engine Lifter Group
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171} Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Inspect the Coolant Diverter Valve Diaphram When Replacing a Failed Precooler on Certain C15 Truck Engines{135D} Inspect the Coolant Diverter Valve Diaphram When Replacing a Failed Precooler on Certain C15 Truck Engines{135D}
C32 Marine Engine Engine Oil and Filter - Change
Cat Alarm and Protection (A;P) Control Panel{7451} Cat Alarm and Protection (A&P) Control Panel{7451}