G3500 Engines Caterpillar


Turbocharger

Usage:

G3516 E6Y


Illustration 1g03205356
Typical example

Table 1
Specification for 379-5363 Turbocharger Gp and 396-9047 Turbocharger Gp 
Item  Qty  Part  Specification description 
16  Tighten the bolts to 55 ± 10 N·m (41 ± 7 lb ft)
16  8C-8581 High Temperature Bolt  Before assembly, apply Loctite C5A copper anti-seize to washer face and threads.
Torque to 45 ± 10 N·m (33 ± 7 lb ft)
16  Tighten the bolts to 55 ± 10 N·m (41 ± 7 lb ft)
162-6466 Bolt  Before assembly, apply Loctite C5A copper anti-seize to threads and bearing surfaces. 
168-2103 Bolt  Before assembly, apply Loctite C5A copper anti-seize to threads and bearing surfaces. 

Caterpillar Information System:

G3500 Engines Cylinder Block
G3500 Engines Turbocharger
C175-16 Locomotive Engine Fuel Control - Test
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425} Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
349F and 352F Excavators Towing the Machine
G3500 Engines Turbocharger
2012/09/27 New Air Tubes for the Exhaust Balance Valve Are Used on Certain C13 Industrial Engines {1052}
3500B Industrial Engine Maintenance Interval Schedule
Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714} Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714}
2012/10/24 A New Fuel Pump Assembly Is Used in the Fuel Transfer Pump Group on C175-16 Engines {1256}
G3500 Engines Stub Shaft (Front)
G3500 Engines Flywheel Housing Cover
G3500 Engines Cylinder Block
G3500 Engines Turbocharger
G3500 Engines Cylinder Block
G3500 Engines Exhaust Manifold - Water Cooled
3512B and 3512C Petroleum Generator Set Engines Prelube Pump
2012/08/30 Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
G3500 Engines Exhaust Manifold - Water Cooled
2012/09/17 A New Unit Injector Hydraulic Pump Group Is Available for Certain C9 Commercial Engines {1714}
CX48-P2300 Petroleum Transmission Transmission Oil Filter (Transmission)
C175-16 Locomotive Engine Lifter Group
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171} Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Inspect the Coolant Diverter Valve Diaphram When Replacing a Failed Precooler on Certain C15 Truck Engines{135D} Inspect the Coolant Diverter Valve Diaphram When Replacing a Failed Precooler on Certain C15 Truck Engines{135D}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.