G3500 Engines Caterpillar


Turbocharger

Usage:

G3516 E6N


Illustration 1g03205276

Table 1
Specification for 379-5359 Turbocharger Gp 
Item  Qty  Part  Specification description 
1N-3279 Clamp As  Use the following procedure to tighten the clamp assembly:

1. Tighten the clamp assembly to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in).
2. Gently hit around the clamp assembly with a soft hammer.
3. Again, tighten the clamp assembly to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in)
9N-2038 Turbine Clamp As  Use the following procedure to tighten the turbine clamp assembly

1. Tighten the turbine clamp assembly to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in).
2. Gently hit around the turbine clamp assembly with a soft hammer.
3. Again, tighten the turbine clamp assembly to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in)
168-7800 Locknut  Before assembly, apply Loctite C5A copper anti-seize to threads and bearing surfaces.
Torque to 54 ± 5 N·m (40 ± 4 lb ft)

Caterpillar Information System:

C175-16 Locomotive Engine Fuel Control - Test
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425} Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
349F and 352F Excavators Towing the Machine
G3500 Engines Turbocharger
2012/09/27 New Air Tubes for the Exhaust Balance Valve Are Used on Certain C13 Industrial Engines {1052}
3500B Industrial Engine Maintenance Interval Schedule
Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714} Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714}
2012/10/24 A New Fuel Pump Assembly Is Used in the Fuel Transfer Pump Group on C175-16 Engines {1256}
G3500 Engines Stub Shaft (Front)
G3500 Engines Flywheel Housing Cover
G3500 Engines Vibration Damper Guard
G3500 Engines Piston and Rings
G3500 Engines Cylinder Block
G3500 Engines Turbocharger
G3500 Engines Cylinder Block
G3500 Engines Turbocharger
G3500 Engines Cylinder Block
G3500 Engines Exhaust Manifold - Water Cooled
3512B and 3512C Petroleum Generator Set Engines Prelube Pump
2012/08/30 Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
G3500 Engines Exhaust Manifold - Water Cooled
2012/09/17 A New Unit Injector Hydraulic Pump Group Is Available for Certain C9 Commercial Engines {1714}
CX48-P2300 Petroleum Transmission Transmission Oil Filter (Transmission)
C175-16 Locomotive Engine Lifter Group
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.