Turbocharger
Show/hide table
Illustration 1 | g03204541 |
Typical example |
Show/hide table
Specification for 379-5361 Turbocharger Gp and 379-5370 Turbocharger Gp | |||
Item | Qty | Part | Specification description |
1 | 2 | 9N-2038 Turbine Clamp As | Use the following procedure to tighten the turbine clamp assembly: 1. Tighten the turbine clamp assembly to 2. Gently hit around the turbine clamp assembly with a soft hammer. 3. Again, tighten the turbine clamp assembly to |
2 | 2 | - | Use the following procedure to tighten the clamp assembly: 1. Tighten the clamp assembly to 2. Gently hit around the clamp assembly with a soft hammer. 3. Again, tighten the clamp assembly to |
3 | 8 | 168-7800 Locknut | Before assembly, apply Loctite C5A copper anti-seize to threads and bearing surfaces.
Torque to |
Caterpillar Information System:
2012/09/27 New Air Tubes for the Exhaust Balance Valve Are Used on Certain C13 Industrial Engines {1052}
3500B Industrial Engine Maintenance Interval Schedule
Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714} Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714}
2012/10/24 A New Fuel Pump Assembly Is Used in the Fuel Transfer Pump Group on C175-16 Engines {1256}
G3500 Engines Stub Shaft (Front)
G3500 Engines Flywheel Housing Cover
G3500 Engines Vibration Damper Guard
G3500 Engines Piston and Rings
G3500 Engines Exhaust Manifold
3500 Industrial Engines Crankshaft
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Lubrication System
C175-16 Locomotive Engine Water Temperature Control Valve - Remove
349F and 352F Excavators Towing the Machine
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425} Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
C175-16 Locomotive Engine Fuel Control - Test
G3500 Engines Turbocharger
G3500 Engines Cylinder Block
G3500 Engines Turbocharger
G3500 Engines Cylinder Block
G3500 Engines Turbocharger
G3500 Engines Cylinder Block
G3500 Engines Exhaust Manifold - Water Cooled
3512B and 3512C Petroleum Generator Set Engines Prelube Pump
2012/08/30 Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}