Piston and Rings
Show/hide table
Illustration 1 | g03204237 |
Typical example |
Show/hide table
Specification for 371-0836 Piston and Rod Gp, 371-0833 Piston and Rod Gp, 133-9376 Piston and Rod Gp, 371-0838 Piston and Rod Gp, 371-0839 Piston and Rod Gp 371-0837 Piston and Rod Gpand 388-6993 Piston and Rod Gp | |||
Item | Qty | Part | Specification Description |
Before installation, lubricate grooves for the piston rings in the piston body with clean engine oil. After assembly, lubricate the mating surfaces of piston rings and the liner with clean engine oil. | |||
1 | 1 | 7E-7581 Piston Ring | Install the top piston ring with the side marked "UP" toward top of the piston. Orient the "RED" color stripe face to the right of the piston ring end gaps. |
Clearance between the ends of the top piston ring is |
|||
Width of groove in new piston body assembly for piston ring is |
|||
Thickness is |
|||
2 | 1 | 8N-1234 Ring | Install the intermediate piston ring with the side marked "UP" toward top of the piston. Orient the "GREEN" color stripe face to the right of the piston ring end gaps. |
Clearance between the ends of the intermediate piston ring is |
|||
Width of groove in new piston body assembly for piston ring is |
|||
Thickness is |
|||
3 | 1 | 7W-2221 Ring | The ends of the oil control piston ring should be at a distance of 180 degrees from the ring end gap when the oil control piston ring is assembled. The "WHITE" color stripe of oil ring spring should be visible at oil ring end gap. |
Clearance between the ends of the new oil control piston ring is |
|||
Width of groove in new piston body assembly for piston ring is |
|||
Thickness is |
|||
4 | 2 | 8N-7296 Pin Retainer | Install the pin retainer with the opening towards top of the piston as shown in Illustration 1. |
5 | 1 | 138-8506 Piston Pin | Thoroughly lubricate the piston pin with clean engine oil before the piston pin is inserted into the piston body assembly and the rod assembly. |
Outside diameter is |
|||
Length is |
|||
- | - | - | Specification for the piston pin bore (elliptical pin bore): Minor diameter is Major diameter is ( Minor diameter + |
Caterpillar Information System:
G3500 Engines Exhaust Manifold
3500 Industrial Engines Crankshaft
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Lubrication System
C175-16 Locomotive Engine Water Temperature Control Valve - Remove
C13 Tier 4 Final Engines Exhaust Temperature - Test
C175-16 Locomotive Engine Exhaust Manifold - Remove and Install
2012/10/01 New Engine Software Is Available for Certain 3500 Engines {1920}
C175-16 Locomotive Engine Air Inlet Manifold - Remove and Install
G3500 Engines Turbocharger
G3500 Engines Engine Oil Temperature Regulator
G3500 Engines Camshaft
C7.1 Marine Generator Set Fuel System - Prime
G3500 Engines Vibration Damper Guard
G3500 Engines Flywheel Housing Cover
G3500 Engines Stub Shaft (Front)
2012/10/24 A New Fuel Pump Assembly Is Used in the Fuel Transfer Pump Group on C175-16 Engines {1256}
Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714} Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714}
3500B Industrial Engine Maintenance Interval Schedule
2012/09/27 New Air Tubes for the Exhaust Balance Valve Are Used on Certain C13 Industrial Engines {1052}
G3500 Engines Turbocharger
349F and 352F Excavators Towing the Machine
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425} Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
C175-16 Locomotive Engine Fuel Control - Test
G3500 Engines Turbocharger