Stub Shaft (Front)
Show/hide table
Illustration 1 | g03204399 |
Show/hide table
Specification for 150-7947 Stub Shaft Gp | |||
Item | Qty | Part | Specification Description |
- | - | - | The alignment mark (4) on the stub shaft (3) must be aligned with the alignment mark on the damper adapter (1). |
2 | 6 | 9F-8122 Bolt | Before assembly, lubricate the threads with engine oil, molybdenum disulfide grease, or graphite base lubricant. |
Torque to |
Caterpillar Information System:
G3500 Engines Flywheel Housing Cover
G3500 Engines Vibration Damper Guard
G3500 Engines Piston and Rings
G3500 Engines Exhaust Manifold
3500 Industrial Engines Crankshaft
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Lubrication System
C175-16 Locomotive Engine Water Temperature Control Valve - Remove
C13 Tier 4 Final Engines Exhaust Temperature - Test
C175-16 Locomotive Engine Exhaust Manifold - Remove and Install
2012/10/01 New Engine Software Is Available for Certain 3500 Engines {1920}
C175-16 Locomotive Engine Air Inlet Manifold - Remove and Install
G3500 Engines Turbocharger
2012/10/24 A New Fuel Pump Assembly Is Used in the Fuel Transfer Pump Group on C175-16 Engines {1256}
Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714} Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714}
3500B Industrial Engine Maintenance Interval Schedule
2012/09/27 New Air Tubes for the Exhaust Balance Valve Are Used on Certain C13 Industrial Engines {1052}
G3500 Engines Turbocharger
349F and 352F Excavators Towing the Machine
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425} Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
C175-16 Locomotive Engine Fuel Control - Test
G3500 Engines Turbocharger
G3500 Engines Cylinder Block
G3500 Engines Turbocharger
G3500 Engines Cylinder Block