Crankshaft
Show/hide table
| |
| Illustration 1 | g03204225 |
Show/hide table
| Specification for 379-4859 Crankshaft Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 7C-6209 Thrust Plate | Use only on the center main bearing as shown in the Illustration |
| B | - | - | End play for the new crankshaft is |
| 2 | 8 | 2W-2288 Plug | Torque to |
| 3 | 18 | 128-4845 Bolt As | Use the following procedure to tighten the bolts:
1. Prior to assembly, lubricate the bolt threads, the bolt shank, the washer, and the underside of the bolt head with 6V-4876 Lubricant. 2. Torque the bolts evenly to 3. Loosen the bolts. 4. Again, torque the bolts evenly to 5. Rotate each bolt for an additional 120 ± 5 degrees. |
Caterpillar Information System:
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Lubrication System
C175-16 Locomotive Engine Water Temperature Control Valve - Remove
C13 Tier 4 Final Engines Exhaust Temperature - Test
C175-16 Locomotive Engine Exhaust Manifold - Remove and Install
2012/10/01 New Engine Software Is Available for Certain 3500 Engines {1920}
C175-16 Locomotive Engine Air Inlet Manifold - Remove and Install
G3500 Engines Turbocharger
G3500 Engines Engine Oil Temperature Regulator
G3500 Engines Camshaft
C7.1 Marine Generator Set Fuel System - Prime
G3500 Engines Gas Engine Ignition
G3500 Engines Air Starting Motor Pressure Regulating Valve
G3500 Engines Exhaust Manifold
G3500 Engines Piston and Rings
G3500 Engines Vibration Damper Guard
G3500 Engines Flywheel Housing Cover
G3500 Engines Stub Shaft (Front)
2012/10/24 A New Fuel Pump Assembly Is Used in the Fuel Transfer Pump Group on C175-16 Engines {1256}
Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714} Procedure for Installing the New Unit Injector Hydraulic Pump Gp on Certain C9 Engines {1714}
3500B Industrial Engine Maintenance Interval Schedule
2012/09/27 New Air Tubes for the Exhaust Balance Valve Are Used on Certain C13 Industrial Engines {1052}
G3500 Engines Turbocharger
349F and 352F Excavators Towing the Machine
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425} Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}