Exhaust Manifold
Show/hide table
| |
| Illustration 1 | g02926881 |
Show/hide table
| Specifications for 374-8169 Exhaust Manifold Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 6 | 329-2502 Bolt | Before assembly, lubricate the threads and the bearing surfaces of the bolt with Loctite C5A Copper Anti-Seize. |
| 2 | 8 | 363-2057 Band Clamp | Before assembly, lubricate the threads and the bearing surfaces of the bolt with Loctite C5A Copper Anti-Seize.
Use the following procedure to tighten four clamp assemblies: 1. Tighten the band clamp to 2. Gently tap around the band clamp with a soft hammer. 3. Again, tighten the band clamp to |
| 3 | 8 | 349-3559 High Temperature Bolt | Before assembly, lubricate the threads and the bearing surfaces of the bolt with Loctite C5A Copper Anti-Seize. |
| Torque to |
|||
Caterpillar Information System:
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Fuel Injection Pump
C27 and C32 Generator Sets Additional Messages
2012/03/29 A Repair Option Is Available for Valve Cover Isolation Seals On Certain C9.3 Engines {1107, 7555}
C175-16 and C175-20 Generator Set Engines Gear Group (Front)
C175-16 Marine Propulsion Engines Gear Group (Front)
C175-16 Marine Propulsion Engines Gear Group (Front)
2012/03/15 New Guidelines For Cleaning Backup Alarms on Certain Cat Products {7406}
3516C Industrial Engine Zinc Rods - Inspect/Replace
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Manual Stop Procedure
3500E Marine Engines Starting the Engine
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Locomotive Engine Fuel Injector
Cracking of Terminal Box Panels On Certain G3508 50Hz Generator Sets{1205, 4460} Cracking of Terminal Box Panels On Certain G3508 50Hz Generator Sets{1205, 4460}
C27 Industrial Engine and C27 Locomotive Engine Engine Speed Control - Remote
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
3512C and 3516C Marine Auxiliary Engines Coolant Level Is Low
C280 Marine and Petroleum Engines Aftercooler Coolant Temperature Is High
C175-16 Locomotive Engine Coolant Contains Fuel
3516B Generator Set Engines with Dynamic Gas Blending Coolant Contains Oil
C175-16 Locomotive Engine Coolant Pressure Is Low
C175-16 Marine Propulsion Engines Exhaust Temperature Is High