Gear Group (Front)
Show/hide table
 | |
| 图 1 | g02924876 |
Show/hide table
| 362-2906 前齿轮总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 348-7076 前适配器组件 | 安装后，前适配器组件中 348-7074 衬套 的孔径为 75.035 mm (2.9541 in)。 衬套的安装深度为 3.6 ± 0.5 mm (0.14 ± 0.02 in)。 |
| 2 | 6 | 281-2711 垫圈 | 组装前，用清洁的发动机机油稍微润滑垫圈的两侧。 |
| 3 | 4 | 279-0768 螺栓 | 组装前，用清洁的发动机机油稍微润滑 281-2712 垫圈 的两侧。 拧紧至扭矩为 190 ± 30 N·m (140 ± 22 lb ft)。 |
| 4 | 1 | 354-1562 泵接头 | 安装后，泵适配器中 318-4810 衬套 的孔径为 94.056 mm (3.7030 in)。 组装期间，使衬套与泵适配器表面平齐。 |
| 5 | 2 | 312-1676 惰轮组件 | 安装后，惰轮组件中 312-1678 衬套 的孔径为 105.980 ± 0.010 mm (4.1724 ± 0.0004 in)。 衬套的安装深度为 2.3 ± 0.5 mm (0.09 ± 0.02 in)。 |
| 6 | 1 | 348-7075 机油泵适配器 | 安装后，机油泵适配器中 348-7074 衬套 的孔径为 75.023 mm (2.9537 in)。 衬套的安装深度为 0.5 ± 0.5 mm (0.02 ± 0.02 in)。 |
| 7 | 4 | 259-4598 O 形密封圈 | 组装前，用密封的润滑剂稍稍润滑孔。 |
| 8 | 2 | 282-8915 惰轮轴 | 直径为 105.880 ± 0.020 mm (4.1685 ± 0.0008 in)。 |
| 9 | 2 | 165-4852 O 形密封圈 | 组装前，用密封的润滑剂稍稍润滑孔。 |
| 10 | 4 | 281-3114 螺栓 | 组装前，用清洁的发动机机油稍微润滑 281-2712 垫圈 的两侧。 拧紧至扭矩为 190 ± 30 N·m (140 ± 22 lb ft)。 |
| 11 | 1 | 331-3656 泵驱动轴 | 直径为 74.900 ± 0.015 mm (2.9488 ± 0.0006 in)。 |
Caterpillar Information System:
C175-16 Marine Propulsion Engines Gear Group (Front)
C175-16 Marine Propulsion Engines Gear Group (Front)
2012/03/15 New Guidelines For Cleaning Backup Alarms on Certain Cat Products {7406}
3516C Industrial Engine Zinc Rods - Inspect/Replace
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Manual Stop Procedure
3500E Marine Engines Starting the Engine
C7 and C9 On-Highway Engines Engine Shutdown Occurs Intermittently
CX48-P2300 Petroleum Transmission Pump Drive - Install
2012/03/05 A New Jacket Water Lines Group Is Used on C175-16 Generator Set Engines {1380}
2012/05/16 A New Valve Lifter Group and Dowel Are Used in C175-16 Engines {1209}
568 Forest Machines Machine Systems Track - Separate - PPR2
C175-16 Marine Propulsion Engines Coolant Temperature Control Module - Test
2012/03/29 A Repair Option Is Available for Valve Cover Isolation Seals On Certain C9.3 Engines {1107, 7555}
C27 and C32 Generator Sets Additional Messages
C175-16 Marine Propulsion Engines Fuel Injection Pump
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Locomotive Engine Fuel Injector
Cracking of Terminal Box Panels On Certain G3508 50Hz Generator Sets{1205, 4460} Cracking of Terminal Box Panels On Certain G3508 50Hz Generator Sets{1205, 4460}
C27 Industrial Engine and C27 Locomotive Engine Engine Speed Control - Remote
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}