C175-16 Marine Propulsion Engines Caterpillar


Exhaust Manifold

Usage:

C175-16 M6A


Illustration 1g02926820

Table 1
Specifications for 374-8167 Exhaust Manifold Gp 
Item  Qty  Part  Specification Description 
363-2057 Band Clamp  Use the following procedure to tighten four clamp assemblies:
1. Tighten the clamp assemblies to 17 ± 2 N·m (150 ± 18 lb in).
2. Gently tap around the clamp assemblies with a soft hammer.
3. Again, tighten the clamp assemblies to 17 ± 2 N·m (150 ± 18 lb in)
246-4924 Gasket  After assembly, bend the tab of the gasket to the surface that is adjacent. 
349-3559 High Temperature Bolt  Before assembly, lubricate the threads and the bearing surfaces of the bolt with Loctite C5A Copper Anti-Seize. 
Torque to 65 ± 5 N·m (48 ± 4 lb ft).

Caterpillar Information System:

C175-16 Marine Propulsion Engines Fuel Injection Pump
C27 and C32 Generator Sets Additional Messages
2012/03/29 A Repair Option Is Available for Valve Cover Isolation Seals On Certain C9.3 Engines {1107, 7555}
C175-16 and C175-20 Generator Set Engines Gear Group (Front)
C175-16 Marine Propulsion Engines Gear Group (Front)
C175-16 Marine Propulsion Engines Gear Group (Front)
2012/03/15 New Guidelines For Cleaning Backup Alarms on Certain Cat Products {7406}
3516C Industrial Engine Zinc Rods - Inspect/Replace
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Manual Stop Procedure
3500E Marine Engines Starting the Engine
C7 and C9 On-Highway Engines Engine Shutdown Occurs Intermittently
CX48-P2300 Petroleum Transmission Pump Drive - Install
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Marine Propulsion Engines Exhaust Manifold
C175-16 Locomotive Engine Fuel Injector
Cracking of Terminal Box Panels On Certain G3508 50Hz Generator Sets{1205, 4460} Cracking of Terminal Box Panels On Certain G3508 50Hz Generator Sets{1205, 4460}
C27 Industrial Engine and C27 Locomotive Engine Engine Speed Control - Remote
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070} General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
3512C and 3516C Marine Auxiliary Engines Coolant Level Is Low
C280 Marine and Petroleum Engines Aftercooler Coolant Temperature Is High
C175-16 Locomotive Engine Coolant Contains Fuel
3516B Generator Set Engines with Dynamic Gas Blending Coolant Contains Oil
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.