Engine Oil Screen
- Drain the engine oil into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Show/hide table
Illustration 1 g02023127 - Remove bolts (1). Remove cover (2).
Show/hide table
Illustration 2 g01201320 - Remove O-ring seal (3) from cover (2).
Show/hide table
Illustration 3 g02887804 - Remove valve (4).
Show/hide table
Illustration 4 g02887836 - Remove oil screen (5).
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Install oil screen (4) in the reverse order of removal.
Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
- Fill the engine with oil.
Caterpillar Information System:
C7.1 (Mech) Industrial Engine Water Temperature Regulator - Remove and Install
C7.1 (Mech) Industrial Engine Water Separator and Fuel Filter (Primary) - Remove and Install
C7.1 (Mech) Industrial Engine Water Pump - Remove
C7.1 (Mech) Industrial Engine Water Pump - Install
C7.1 (Mech) Industrial Engine Vibration Damper and Pulley - Remove
C7.1 (Mech) Industrial Engine Vibration Damper and Pulley - Install
C7.1 (Mech) Industrial Engine Valve Mechanism Cover - Remove and Install
C7.1 (Mech) Industrial Engine V-Belts - Remove and Install
C7.1 (Mech) Industrial Engine Turbocharger - Remove - Turbocharger Top Mounted
C7.1 (Mech) Industrial Engine Turbocharger - Remove - Side Mounted Turbocharger
C7.1 (Mech) Industrial Engine Turbocharger - Install - Side Mounted Turbocharger
C7.1 (Mech) Industrial Engine Turbocharger - Install - Side Mounted Turbocharger
C175-16 Marine Propulsion Engines Fuel Pressure Is High - Fuel Transfer System
C175-16 Engines for Off-Highway Truck/Tractors Fuel Pressure Is Low - Fuel Transfer System
C175-16 and C175-20 Generator Set Engines Fuel Pressure Is Low - Fuel Supply System
C175-16 Marine Propulsion Engines Fuel Pressure Is High - Fuel Supply System
C175-16 Marine Propulsion Engines Sensor Signal (Analog, Passive) - Test
2012/04/12 A New Service Replacement Front Housing Is Available for C175-16 Engines {1151, 1162, 1206}
C7.1 (Mech) Industrial Engine Air Compressor - Remove and Install
2012/02/20 New Torque Specification for Position Sensor on 3054E, C6.6, and C4.4 Engines {1408, 1907}
2012/06/08 Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
C175-16 Marine Engine Fuel and Auxiliary Water Pump Drive
C175-16 Marine Engine Vibration Damper
3512B and 3512C Petroleum Generator Set Engines Cylinder Is Noisy