3512C and 3516C Marine Auxiliary and Generator Set Engines Caterpillar


Engine Air Cleaner Element (Single Element) - Inspect/Replace

Usage:

3512C 2A2
每日检查控制面板,查看是否存在须更换空气滤清器的指示。

注: 当进气限制保持在 7 kPa (1.02 psi) 或者超过 7 kPa (1.02 psi) 达 5 秒钟时,会寄存一个事件代码。 发动机有可能出现降额。


注意

未安装空气滤清器滤芯切勿运转发动机。 空气滤清器滤芯损坏时也决不能运转发动机。 不要使用褶纸、垫圈或密封件损坏的滤芯。 污物进入发动机会造成发动机零部件的早期磨损和损坏。 空气滤清器滤芯有助于防止空气中的碎屑进入进气口。


如果空气滤清器滤芯堵塞,空气就可能将空气滤清器滤芯材料裂开。 未经过滤的空气将急剧加速发动机内部的磨损。 Cat代理商能为您的应用提供正确的空气滤清器滤芯。 关于正确的空气滤清器滤芯,请向 Cat 代理商咨询。

安装前,应彻底检查空气滤清器滤芯的过滤材料是否有破裂和/或孔洞。 检查空气滤清器滤芯的密封垫或密封件有无损坏。 保持有适当数量的空气滤清器滤芯配件以供更换之用。



图 1g02731284
空气滤清器后部视图和空气滤清器前部视图
(1) 卡箍
(2) 空气滤清器盖
(3) 空气滤清器滤芯


图 2g02731323
空气滤清器滤芯视图

  1. 打开锁耳并拆下空气滤清器盖。 拆下盖。

  2. 拆下用过的空气滤清器芯并依照当地条例进行处理。

  3. 将用过的滤芯换成新的。

  4. 将盖换到原始位置并关闭锁耳。

  5. 发动机上的每个空气滤清器滤芯都重复这一过程。

Caterpillar Information System:

2011/10/20 Special Instruction, REHS7410, "Customer Connections for G3304B and G3306B Engines" Is Available {1408, 5258}
2012/01/03 Improvements Have Been Made to Manufacturing Processes of the Piston for the Track Adjuster on Certain Excavators and Mobile Hydraulic Power Units {4157}
Customer Connections for G3304B and G3306B Engines {1408, 5258} Customer Connections for G3304B and G3306B Engines {1408, 5258}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Implement Pilot Oil)
Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451} Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451}
349F and 352F Excavators Machine System Specifications Hoist Solenoid Valve - Boom/Stick Regeneration
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
320E and 323E Excavators Machine System Specifications Relief Valve (Boom Lowering Control Device)
320 GC, 320 and 323 Excavator Machine Systems Specifications Track
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Stick Cylinder
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Guidance Terms
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions
320D and 323D Excavators Machine System Specifications Stick Lines - Quick Coupler
320D and 323D Excavators Machine System Specifications Auxiliary Hydraulic Lines - Quick Coupler
320E and 323E Excavators Machine System Specifications Stick Cylinder Lines - Stick Lowering Control
320E and 323E Excavators Machine System Specifications Hydraulic Oil Cooler Lines Group
C3.4B Industrial Engine Engine Crankcase Breather Element - Replace
2011/10/20 New Fuel Transfer Pumps Are Used on C175-16 Engines {1256}
2012/04/24 A Magnetic Plug Is Available for the High-Pressure Fuel Pump on C175-16 Engines {1251}
3516C Industrial Engine Safety Messages
3516C Generator Set Engines Engine Cranks but Does Not Start
3516C Generator Set Engines Engine Has Mechanical Noise (Knock)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.