Stick Cylinder Lines - Stick Lowering Control
Show/hide table
Illustration 1 | g02732115 |
Show/hide table
Item | Qty | Part | Specification Description |
1 | 1 | 538-1085 Tube As | Torque to |
B | - | - | Distance from the center of the mounting pin to the support assemblies (2) is |
C | - | - | Distance from the center of the mounting pin to the support assemblies (3) is |
4 | 8 | 8T-4196 Bolt | Torque to |
5 | 2 | 8t-4186 Bolt | Torque to |
D | - | - | Orientation of support assemblies is 30 ± 3 degrees. |
Caterpillar Information System:
320D and 323D Excavators Machine System Specifications Auxiliary Hydraulic Lines - Quick Coupler
320D and 323D Excavators Machine System Specifications Stick Lines - Quick Coupler
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Guidance Terms
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
2011/10/20 Special Instruction, REHS7410, "Customer Connections for G3304B and G3306B Engines" Is Available {1408, 5258}
2012/01/03 Improvements Have Been Made to Manufacturing Processes of the Piston for the Track Adjuster on Certain Excavators and Mobile Hydraulic Power Units {4157}
Customer Connections for G3304B and G3306B Engines {1408, 5258} Customer Connections for G3304B and G3306B Engines {1408, 5258}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Implement Pilot Oil)
Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451} Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451}
349F and 352F Excavators Machine System Specifications Hoist Solenoid Valve - Boom/Stick Regeneration
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
320E and 323E Excavators Machine System Specifications Hydraulic Oil Cooler Lines Group
C3.4B Industrial Engine Engine Crankcase Breather Element - Replace
2011/10/20 New Fuel Transfer Pumps Are Used on C175-16 Engines {1256}
2012/04/24 A Magnetic Plug Is Available for the High-Pressure Fuel Pump on C175-16 Engines {1251}
3516C Industrial Engine Safety Messages
3516C Generator Set Engines Engine Cranks but Does Not Start
3516C Generator Set Engines Engine Has Mechanical Noise (Knock)
3516C Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
3516C Generator Set Engines Engine Shutdown Occurs Intermittently
3516C Generator Set Engines Engine Stalls at Low RPM
3516C Generator Set Engines Engine Top Speed Is Not Obtained
C13 Engine for Combat and Tactical Vehicles Electronic Unit Injector Wiring