824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Caterpillar


Pressure Sensor (Implement Pilot Oil)

Usage:

824K 234


Illustration 1g03839887

Table 1
Specification for 344-7389 Pressure Sensor Gp 
Item  Qty  Part  Specification Description 
344-7389 Pressure Sensor Gp  In case of ferrous material tighten to 62 to 68 N·m (46 to 50 lb ft)
Operating voltage is 7 to 14 VDC.
Output type is PWM.
Output frequency is 500 ± 100 Hz.
Duty cycle is 5 to 95 %.  

Caterpillar Information System:

Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451} Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451}
349F and 352F Excavators Machine System Specifications Hoist Solenoid Valve - Boom/Stick Regeneration
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
320E and 323E Excavators Machine System Specifications Relief Valve (Boom Lowering Control Device)
320 GC, 320 and 323 Excavator Machine Systems Specifications Track
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Stick Cylinder
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
2012/03/13 A New Piston Is Used in Certain C18 Engines {1214, 1225}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
2011/12/05 New Heat Exchanger Groups and Spacers Are Used on Certain C18 Commercial and Marine Engines {1379}
Customer Connections for G3304B and G3306B Engines {1408, 5258} Customer Connections for G3304B and G3306B Engines {1408, 5258}
2012/01/03 Improvements Have Been Made to Manufacturing Processes of the Piston for the Track Adjuster on Certain Excavators and Mobile Hydraulic Power Units {4157}
2011/10/20 Special Instruction, REHS7410, "Customer Connections for G3304B and G3306B Engines" Is Available {1408, 5258}
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Guidance Terms
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions
320D and 323D Excavators Machine System Specifications Stick Lines - Quick Coupler
320D and 323D Excavators Machine System Specifications Auxiliary Hydraulic Lines - Quick Coupler
320E and 323E Excavators Machine System Specifications Stick Cylinder Lines - Stick Lowering Control
320E and 323E Excavators Machine System Specifications Hydraulic Oil Cooler Lines Group
C3.4B Industrial Engine Engine Crankcase Breather Element - Replace
2011/10/20 New Fuel Transfer Pumps Are Used on C175-16 Engines {1256}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.