2011/12/05 Caterpillar


New Heat Exchanger Groups and Spacers Are Used on Certain C18 Commercial and Marine Engines {1379}

Usage:

C18 C1J
Gen Set Engine
C18 (S/N: DES1-UP)
C18 MARINE GS (S/N: CYN1-UP)
Generator Set
C18 GEN SET (S/N: DDS1-UP)
C18 MARINE GS (S/N: GBM1-UP; GEN1-UP; MGS1-UP)
Marine Engine
C18 MARINE (S/N: WKB1-UP; PLE1-UP; CKH1-UP; C1J1-UP; GES1-UP; KJT1-UP; JKX1-UP)
C18 MARINE ENG (S/N: J2K1-UP; T2P1-UP)

New heat exchanger groups are now used. These heat exchanger groups utilize thinner heat exchanger plates and shorter spacers. The new heat exchanger groups have the same performance capability as the current heat exchangers.

Due to the difference in spacer and plate size is important to follow the parts system information as the new heat exchanger groups are serviced by the new heat exchanger plate groups and spacers. Refer to Table 1 for the proper part numbers.

Note: Current serviceable parts are available through the parts system for servicing the existing heat exchanger groups.

Table 1
Serial Number Prefixes  Former Part Number  Part Description  New Part Number  Part Description 
S/N:CKH, PLE, CYN, GEN, C1J, WKB, MGS  200-7102  Sea Water Heat Exchanger Gp
Without fuel cooler 
373-2560  Sea Water Heat Exchanger Gp
Without fuel cooler 
S/N:CKH, PLE, CYN, GEN, C1J, WKB, MGS  201-6758  Sea Water Heat Exchanger Gp
Fuel cooled 
373-2561  Sea Water Heat Exchanger Gp
Fuel cooled 
S/N:JKX, J2K, T2P, GES, KJT, GBM  290-3989  Sea Water Heat Exchanger Gp
Without fuel cooler 
373-2562  Sea Water Heat Exchanger Gp
Without fuel cooler 
S/N:JKX, J2K, T2P, GES, KJT, GBM  290-3991  Sea Water Heat Exchanger Gp
Fuel cooled 
373-2563  Sea Water Heat Exchanger Gp
Fuel cooled 
S/N:CKH, PLE, CYN, GEN, C1J, WKB, JKX, J2K, T2P, GES, KJT, MGS, GBM  202-7529  Heat Exchanger Plate Gp
Fuel cooled 
373-3364  Sea Water Heat Exchanger Gp
Fuel cooled 
S/N:CKH, PLE, CYN, GEN, C1J, WKB, JKX, J2K, T2P, GES, KJT, MGS, GBM  202-7528  Heat Exchanger Plate Gp
Without fuel cooler 
373-3366  Heat Exchanger Plate Gp
Without fuel cooler 
S/N:CKH, PLE, CYN, GEN, C1J, WKB, JKX, J2K, T2P, GES, KJT, MGS, GBM  357-5978  Spacer As
Fuel cooled 110.1mm 
373-3372  Spacer As
Fuel cooled 95.2mm 
S/N:CKH, PLE, CYN, GEN, C1J, WKB, JKX, J2K, T2P, GES, KJT, MGS, GBM  357-5429  Special Spacer
Without fuel cooler 95mm 
373-3373  Spacer As
Without fuel cooler 81.6mm 

This change is effective on the serial numbers listed in Table 2.

Table 2
Effective Serial Numbers 
S/N:JKX1302-UP 
S/N:T2P1630-UP 
S/N:GES897-UP 
S/N:GBM620-UP 

Caterpillar Information System:

2011/11/11 New Heat Exchanger Groups and Spacers Are Used on Certain C32 Marine Engines {1379}
320E and 323E Excavators Machine System Specifications Swivel
320E and 323E Excavators Machine System Specifications Travel Motor Guard
2011/12/14 A New Engine Oil Cooler Bypass Is Used for C175-16 Engines {1307}
2011/10/19 Improved Bolts and Washers Along with a New Procedure Are Used to Fasten the Pilot to the Lockup Clutch Housing {3101, 7553}
3516C Marine Engine Engine Operation
2011/12/23 Special Instruction, REHS7409, "Initial Start-Up of CG137 and G3300B Engines" Is Available {1000}
2011/11/16 A New Turbocharger Water Line Is Used for Certain 3516B and 3516C Engines {1380}
3516C Industrial Engine Product Lifting
3500 Generator Sets Engine Air Precleaner - Check/Clean
3500 Generator Sets Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
3500 Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
2012/03/13 A New Piston Is Used in Certain C18 Engines {1214, 1225}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
320E and 323E Excavators Machine System Specifications Stick Cylinder
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320 GC, 320 and 323 Excavator Machine Systems Specifications Track
320E and 323E Excavators Machine System Specifications Relief Valve (Boom Lowering Control Device)
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
349F and 352F Excavators Machine System Specifications Hoist Solenoid Valve - Boom/Stick Regeneration
Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451} Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Implement Pilot Oil)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.