Bucket Cylinder
Show/hide table
Illustration 1 | g02562996 |
Show/hide table
Specification for 356-8788 Bucket Cylinder Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 357-5712 Bushing | Inside diameter before assembly is Installation depth is |
2 | 1 | 246-9113 Retainer | Before assembly, apply blue Loctite 242 to the threads.
Torque to |
3 | 1 | 357-0756 Piston | Before assembly, apply 309-6932 Hydraulic Oil to the face and threads.
Torque to |
A | 1 | 356-8789 Cylinder As | Bore diameter is |
B | 1 | 356-8794 Rod As | Diameter is |
C | 1 | 126-2043 Head | Bore of the head over two lands is |
4 | 1 | 241-7382 Bushing | Inside diameter before assembly is Installation depth is |
5 | 1 | 212-0907 Connector Plate | Before assembly, apply Loctite 271 high flex GM on the bottom side of the connector plate. |
6 | 1 | 9X-3592 Seal As | Lubricate the inside diameter and the outside diameter with clean grease. |
7 | 2 | 158-9063 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
8 | 1 | 179-9674 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
9 | 1 | 114-0756 Bushing | Outside diameter before assembly is Thickness is |
10 | 1 | 170-9844 Buffer Seal | Lubricate the sealing lip with the lubricant that is being sealed. |
11 | 1 | 170-9860 U-Cup Seal | Lubricate the sealing lip with the lubricant that is being sealed. |
12 | 1 | 165-9286 Lip Type Seal | Lubricate the sealing lip with the lubricant that is being sealed. |
13 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
14 | 2 | 095-1267 Socket Setscrew | Before assembly, apply blue Loctite 242 to the threads.
Torque to |
15 | 1 | 6V-8223 Socket Setscrew | Before assembly, apply blue Loctite 242 to the threads.
Torque to |
Caterpillar Information System:
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Stick Cylinder
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
2012/03/13 A New Piston Is Used in Certain C18 Engines {1214, 1225}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
2011/12/05 New Heat Exchanger Groups and Spacers Are Used on Certain C18 Commercial and Marine Engines {1379}
2011/11/11 New Heat Exchanger Groups and Spacers Are Used on Certain C32 Marine Engines {1379}
320E and 323E Excavators Machine System Specifications Swivel
320E and 323E Excavators Machine System Specifications Travel Motor Guard
2011/12/14 A New Engine Oil Cooler Bypass Is Used for C175-16 Engines {1307}
2011/10/19 Improved Bolts and Washers Along with a New Procedure Are Used to Fasten the Pilot to the Lockup Clutch Housing {3101, 7553}
3516C Marine Engine Engine Operation
320 GC, 320 and 323 Excavator Machine Systems Specifications Track
320E and 323E Excavators Machine System Specifications Relief Valve (Boom Lowering Control Device)
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
349F and 352F Excavators Machine System Specifications Hoist Solenoid Valve - Boom/Stick Regeneration
Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451} Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Implement Pilot Oil)
Customer Connections for G3304B and G3306B Engines {1408, 5258} Customer Connections for G3304B and G3306B Engines {1408, 5258}
2012/01/03 Improvements Have Been Made to Manufacturing Processes of the Piston for the Track Adjuster on Certain Excavators and Mobile Hydraulic Power Units {4157}
2011/10/20 Special Instruction, REHS7410, "Customer Connections for G3304B and G3306B Engines" Is Available {1408, 5258}
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Guidance Terms
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions