3516C Industrial Engine Caterpillar


Safety Messages

Usage:

3516C MLF
There may be several specific safety messages on your engine. The exact location and a description of the safety messages are reviewed in this section. Become familiar with all of the safety messages.

Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap for cleaning the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off the engine.

Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Cat dealer can provide new safety messages.



Illustration 1g02855280
View of the right side of a typical 3500 C Marine Engine


Illustration 2g02855296
View of the left side of a typical 3500 C Marine Engine

(1) Universal Warning



Illustration 3g01370904

------ WARNING! ------

Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.


One safety message is located on the first rocker arm cover and on the last rocker arm cover on each side of the engine.

(2) Hot Surface



Illustration 4g01372256

------ WARNING! ------

Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.


One safety message is located on the rocker arm cover for cylinder 8 and on cylinder 9.

(3) Hot Fluid Under Pressure



Illustration 5g01371640

------ WARNING! ------

Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.


One safety message is located on the top of the expansion tank.

(4) Vapor Explosion



Illustration 6g01407639

------ WARNING! ------

Warning: Vapor Explosion. Could cause serious injury or death. Read the Operation and Maintenance Manual before conducting any maintenance on the duplex fuel filter.


One safety message is located on each side of the duplex fuel filter housing.

(5) Vapor Explosion



Illustration 7g01407639

------ WARNING! ------

Warning: Vapor Explosion. May cause serious injury or death. Read the Operation and Maintenance Manual before conducting any maintenance on the duplex oil filter.


One safety message is located on each side of the duplex oil filter housing.

(6) Hot Surface



Illustration 8g01384734

------ WARNING! ------

Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.


One safety message is located on the oil cooler on the right side of the engine. One safety message is located on a crankcase cover on the left side of the engine.

(7) Fire Hazard



Illustration 9g01948611

------ WARNING! ------

Fire Hazard! Stop the Engine. Do not open the service doors if a fire exists. Opening the service doors if a fire exists could result in personal injury or death. Read and understand the instructions in the Operation and Maintenance Manual.


One safety message is located on a crankcase cover on each side of the engine.

Caterpillar Information System:

2012/04/24 A Magnetic Plug Is Available for the High-Pressure Fuel Pump on C175-16 Engines {1251}
2011/10/20 New Fuel Transfer Pumps Are Used on C175-16 Engines {1256}
C3.4B Industrial Engine Engine Crankcase Breather Element - Replace
320E and 323E Excavators Machine System Specifications Hydraulic Oil Cooler Lines Group
320E and 323E Excavators Machine System Specifications Stick Cylinder Lines - Stick Lowering Control
320D and 323D Excavators Machine System Specifications Auxiliary Hydraulic Lines - Quick Coupler
320D and 323D Excavators Machine System Specifications Stick Lines - Quick Coupler
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Guidance Terms
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
2011/10/20 Special Instruction, REHS7410, "Customer Connections for G3304B and G3306B Engines" Is Available {1408, 5258}
2012/01/03 Improvements Have Been Made to Manufacturing Processes of the Piston for the Track Adjuster on Certain Excavators and Mobile Hydraulic Power Units {4157}
3516C Generator Set Engines Engine Cranks but Does Not Start
3516C Generator Set Engines Engine Has Mechanical Noise (Knock)
3516C Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
3516C Generator Set Engines Engine Shutdown Occurs Intermittently
3516C Generator Set Engines Engine Stalls at Low RPM
3516C Generator Set Engines Engine Top Speed Is Not Obtained
C13 Engine for Combat and Tactical Vehicles Electronic Unit Injector Wiring
C13 Engine for Combat and Tactical Vehicles Electronic Unit Injector Wiring
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679} Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
793F and 797F Off-Highway Trucks Power Train Electronic Control System General Information
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Emerging Symptom Information
3516C Generator Set Engines Oil Contains Fuel
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.