Transmission Planetary - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 189-0408 | 钩环组件 | 2 |
| B | 1U-9200 | 操纵杆滚轮起重机 | 1 |
| C | 1P-2420 | 变速箱修复台 | 1 |
| D | 138-7574 | 连杆支架 | 2 |
开始:
- 分离变速箱。 请参阅拆解和组装, "变速箱和变矩器 - 分离"。
- 将工具 (A) 、工具 (B) 和适当的起吊设备装到变速箱组件 (1) 上。 变速箱组件 (1) 的重量约为 1814 kg (4000 lb)。
Show/hide table
 | |
| 图 1 | g01439313 |
- 旋转变速箱组件 (1) 。
- 将变速箱组件 (1) 定位到工具 (B) 上。 拆下工具 (B) 和适当的起吊设备。
Show/hide table
 | |
| 图 2 | g02719680 |
- 拆下螺栓 (2) 。 使用工具 (D) 和适当的起吊设备将行星变速箱 (3) 从变速箱壳体上拆下。 变速箱 (3) 的重量约为 1490 kg (3285 lb)。 将变速箱壳体从工具 (C) 上拆下。
Show/hide table
 | |
| 图 3 | g02719663 |
- 将行星变速箱 (3) 固定到工具 (C) 上。
Show/hide table
 | |
| 图 4 | g02719678 |
Caterpillar Information System:
C18 Generator Set Maintenance Interval Schedule - Standby
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
C18 Generator Set Maintenance Interval Schedule - Prime
3516C Generator Sets Gauges and Indicators
3512E Tier 4 Final Engines for Land Electric Drilling Inlet Manifold Temperature Sensor
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Sensor
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
2011/11/16 An Improved Fan Assembly Is Used on Certain 3406 Generator Sets {1353, 1356}
CG137-08 and CG137-12 Generator Sets Engine Oil Lines
CG137-08 and CG137-12 Generator Sets Crankshaft Pulley
CG137-08 and CG137-12 Generator Sets Cover Group (Front Housing)
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Install
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
TH55FT-E70 and TH55FT-E90 Transmissions Power Train Electronic Control System Event Codes
3516C Generator Sets Symbols
C32 Marine Generator Set Gauges and Indicators - If Equipped
C175 Cooling System Cavitation Test {1350} C175 Cooling System Cavitation Test {1350}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea General Information
2011/09/19 New Components and Inspection Criteria for the Oil Drain Tube Are Used for Certain 3126 and C7 Marine Engines {1052, 1307}
C32 Marine Generator Set Engine Oil Level - Check
CG137-08 and CG137-12 Generator Sets Magnetic Switch
CG137-08 and CG137-12 Generator Sets Magnetic Switch
CG137-08 and CG137-12 Generator Sets Camshaft Bearings