CG137-08 and CG137-12 Generator Sets Caterpillar


Magnetic Switch

Usage:

CG137-08 FPL


Illustration 1g02720471

Table 1
Specification for 175-2329 Magnetic Switch Gp and 175-2330 Magnetic Switch Gp 
Item  Qty  Part  Specification Description 
5C-2890 Nut  Torque to 5.5 ± 0.5 N·m (48.7 ± 4.4 lb in)
Nominal voltage supply is 24 VDC. 
Maximum pull in voltage at 25 °C (77 °F) is 16 VDC. 
Maximum hold in voltage at 25 °C (77 °F) is 8 VDC. 
Coil resistance at 20 °C (68 ° F) is 27.50 ± 2.75 ohms. 
Contact position is normally open. 
Maximum current draw is 1.25 Amp. 

Caterpillar Information System:

C32 Marine Generator Set Engine Oil Level - Check
2011/09/19 New Components and Inspection Criteria for the Oil Drain Tube Are Used for Certain 3126 and C7 Marine Engines {1052, 1307}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea General Information
C175 Cooling System Cavitation Test {1350} C175 Cooling System Cavitation Test {1350}
C32 Marine Generator Set Gauges and Indicators - If Equipped
3516C Generator Sets Symbols
TH55FT-E70 and TH55FT-E90 Transmissions Power Train Electronic Control System Event Codes
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Install
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Remove
C18 Generator Set Maintenance Interval Schedule - Standby
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
CG137-08 and CG137-12 Generator Sets Magnetic Switch
CG137-08 and CG137-12 Generator Sets Camshaft Bearings
2011/09/19 New Hardware Components Are Used for the Oil Drain Tube on Certain C9 Marine Engines {1052, 1307}
2011/09/19 New Bolts and Spacers Are Used on the Water Manifolds of Certain Marine Engines {1380, 7553}
C32 Marine Generator Set Plate Locations and Film Locations
C32 Marine Generator Set Engine Oil Level Gauge - Calibrate
3512C Petroleum Engines Overhaul (Top End)
3116 and 3126 Marine Engines Coolant Level - Check
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
C15 Generator Sets Product Lifting
C32 Marine Generator Set Engine Air Cleaner Element (Single Element) - Inspect/Replace
Cat® Detect Object Detection System Diagnostic Summary Screen
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.