3516C Generator Sets Caterpillar


Symbols

Usage:

3516C SCJ

General Symbols



Illustration 1g01168026
The control panel and modules utilize International Graphic Symbols to identify functions.
A typical list of the symbols that are used is shown above.

Aftertreatment Symbols

Container - Air - Filling - Compressed air in from source.

Container - Air - Draining/Emptying - Compressed air out to the DEF injector.

Urea Fill Container - Urea in from the storage or day tank.

Urea - Out to Injector - Urea out to the DEF injector.

Urea - Vent/Overflow Container - Urea vent/overflow.

Urea Pump - A green light indicates that the DEF dosing pump is operating.

Urea Pump - Failure/Malfunction - A yellow light indicates that a warning alarm has been received. The dosing pump is operating.

Urea Pump - Off/Inactive - A red light indicates that the system has received a shutdown event. The dosing pump has stopped.

Input/Output - Connection of the engine ECM and the communication adaptor.

DC Cabinet On/Off - Dosing cabinet on/off switch. Located near main system disconnect switch.

Voltage - 110V - 50/60Hz - Film that indicates electrical specifications.

Caterpillar Information System:

TH55FT-E70 and TH55FT-E90 Transmissions Power Train Electronic Control System Event Codes
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Install
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Remove
C18 Generator Set Maintenance Interval Schedule - Standby
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
C18 Generator Set Maintenance Interval Schedule - Prime
3516C Generator Sets Gauges and Indicators
3512E Tier 4 Final Engines for Land Electric Drilling Inlet Manifold Temperature Sensor
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Sensor
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
C32 Marine Generator Set Gauges and Indicators - If Equipped
C175 Cooling System Cavitation Test {1350} C175 Cooling System Cavitation Test {1350}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea General Information
2011/09/19 New Components and Inspection Criteria for the Oil Drain Tube Are Used for Certain 3126 and C7 Marine Engines {1052, 1307}
C32 Marine Generator Set Engine Oil Level - Check
CG137-08 and CG137-12 Generator Sets Magnetic Switch
CG137-08 and CG137-12 Generator Sets Magnetic Switch
CG137-08 and CG137-12 Generator Sets Camshaft Bearings
2011/09/19 New Hardware Components Are Used for the Oil Drain Tube on Certain C9 Marine Engines {1052, 1307}
2011/09/19 New Bolts and Spacers Are Used on the Water Manifolds of Certain Marine Engines {1380, 7553}
C32 Marine Generator Set Plate Locations and Film Locations
C32 Marine Generator Set Engine Oil Level Gauge - Calibrate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.