CG137-08 and CG137-12 Generator Sets Caterpillar


Engine Oil Lines

Usage:

CG137-08 FPL


Illustration 1g02717943

Table 1
Specification for 363-0515 Engine Oil Lines Gp 
Item  Qty  Part  Specification Description 
109-0078 O-Ring Seal  Lubricate the bore of the O-ring seal lightly with the fluid that is being sealed. 
8M-1047 Taperlock Stud  Torque to 35 ± 5 N·m (26 ± 4 lb ft)
8J-4351 O-Ring Seal  Lubricate the bore of the O-ring seal lightly with the fluid that is being sealed. 


Illustration 2g02717963

Table 2
Specification for 363-0515 Engine Oil Lines Gp 
Item  Qty  Part  Specification Description 
4N-8150 Spring  Length under test force is 55.24 mm (2.175 inch).
Test force is 75.619 ± 5.800 N (16.999 ± 1.304 lb).
Free length after test force is 93.726 mm (3.6900 inch)

Caterpillar Information System:

CG137-08 and CG137-12 Generator Sets Crankshaft Pulley
CG137-08 and CG137-12 Generator Sets Cover Group (Front Housing)
CG137-08 and CG137-12 Generator Sets Cylinder Block
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000} Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
CG137-08 and CG137-12 Generator Sets Engine Oil Filter Base
TA19 M4WD Agricultural Transmission Modulating Valve (Transmission Clutch)
CG137-08 and CG137-12 Generator Sets Flywheel Housing Cover
Protecting the C175 Electronic Thermostat from Moisture Entry{1355, 135V, 1380, 1393} Protecting the C175 Electronic Thermostat from Moisture Entry{1355, 135V, 1380, 1393}
3516C Generator Sets Coolant Level - Check
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Engine Oil Level - Check
3516C Generator Set Engines Crankcase Pressure Is High
2011/11/16 An Improved Fan Assembly Is Used on Certain 3406 Generator Sets {1353, 1356}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Sensor
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
3512E Tier 4 Final Engines for Land Electric Drilling Inlet Manifold Temperature Sensor
3516C Generator Sets Gauges and Indicators
C18 Generator Set Maintenance Interval Schedule - Prime
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
C18 Generator Set Maintenance Interval Schedule - Standby
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Remove
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Install
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.