TA19 M4WD Agricultural Transmission Caterpillar


Modulating Valve (Transmission Clutch)

Usage:

TA19-M4WD XAE



Illustration 1g02717040

Table 1
Specification for 244-7772 Modulating Valve Gp    
Item     Qty     Part     Specification Description    
1     -     -     Apply 185-3996 Thread Lock Compound to the external tube threads.    
2     1     218-2373 Nut     Torque to
13.0 ± 1.5 N·m (115.1 ± 13.3 lb in).    
3     1     6V-3965 Fitting     Torque to
14 ± 4 N·m (124 ± 35 lb in).    
4     1     118-3731 Spring     Length under test force is
14.00 mm (0.551 inch).
Test force is
36.0 ± 1.8 N (8.1 ± 0.4 lb).
Free length after test is
15.99 mm (0.630 inch).    
5     1     323-9533 Coil     Resistance of the coil at 25 °C is 2.2 ± 0.2 ohms.    

Caterpillar Information System:

CG137-08 and CG137-12 Generator Sets Flywheel Housing Cover
Protecting the C175 Electronic Thermostat from Moisture Entry{1355, 135V, 1380, 1393} Protecting the C175 Electronic Thermostat from Moisture Entry{1355, 135V, 1380, 1393}
3516C Generator Sets Coolant Level - Check
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Engine Oil Level - Check
3516C Generator Set Engines Crankcase Pressure Is High
C7.1 Engines for Caterpillar Built Machines Camshaft Bearings
CG137-08 and CG137-12 Generator Sets Piston and Rings
SPF343 and SPF343C Trailer Mounted Pumpers Overhaul (Top End)
3500C Marine Engines Engine Oil and Filter - Change
C18 Generator Set Refill Capacities
3516C Generator Set Engines Inlet Air Is Restricted
CG137-08 and CG137-12 Generator Sets Engine Oil Filter Base
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000} Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
CG137-08 and CG137-12 Generator Sets Cylinder Block
CG137-08 and CG137-12 Generator Sets Cover Group (Front Housing)
CG137-08 and CG137-12 Generator Sets Crankshaft Pulley
CG137-08 and CG137-12 Generator Sets Engine Oil Lines
2011/11/16 An Improved Fan Assembly Is Used on Certain 3406 Generator Sets {1353, 1356}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Sensor
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
3512E Tier 4 Final Engines for Land Electric Drilling Inlet Manifold Temperature Sensor
3516C Generator Sets Gauges and Indicators
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.