CG137-08 and CG137-12 Generator Sets Caterpillar


Cover Group (Front Housing)

Usage:

CG137-08 FPL



Illustration 1g03320886

Table 1
Specification for 353-9339 Front Housing Cover Gp and 381-9089 Front Housing Cover Gp    
Item     Qty     Part     Specification Description    
1     3     2P-1974 Taperlock Stud     Torque to 35 ± 5 N·m (26 ± 4 lb ft).    

Caterpillar Information System:

CG137-08 and CG137-12 Generator Sets Cylinder Block
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000} Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
CG137-08 and CG137-12 Generator Sets Engine Oil Filter Base
TA19 M4WD Agricultural Transmission Modulating Valve (Transmission Clutch)
CG137-08 and CG137-12 Generator Sets Flywheel Housing Cover
Protecting the C175 Electronic Thermostat from Moisture Entry{1355, 135V, 1380, 1393} Protecting the C175 Electronic Thermostat from Moisture Entry{1355, 135V, 1380, 1393}
3516C Generator Sets Coolant Level - Check
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Engine Oil Level - Check
3516C Generator Set Engines Crankcase Pressure Is High
C7.1 Engines for Caterpillar Built Machines Camshaft Bearings
CG137-08 and CG137-12 Generator Sets Piston and Rings
CG137-08 and CG137-12 Generator Sets Crankshaft Pulley
CG137-08 and CG137-12 Generator Sets Engine Oil Lines
2011/11/16 An Improved Fan Assembly Is Used on Certain 3406 Generator Sets {1353, 1356}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Sensor
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
3512E Tier 4 Final Engines for Land Electric Drilling Inlet Manifold Temperature Sensor
3516C Generator Sets Gauges and Indicators
C18 Generator Set Maintenance Interval Schedule - Prime
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
C18 Generator Set Maintenance Interval Schedule - Standby
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Planetary - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.