Gear Group (Front)
Show/hide table
 | |
| 图 1 | g02563987 |
(6) 附件驱动器的螺纹孔 | |
Show/hide table
| 361-5599 前齿轮总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 363-5182 凸轮轴驱动齿轮 | 齿轮的齿数为 96。 |
| 齿轮的孔径为 58.900 ± 0.013 mm (2.3189 ± 0.0005 in)。 |
|||
| 2 | - | - | 将惰轮上的正时标记对准凸轮轴齿轮上的正时标记和曲轴齿轮上的标记。 |
| 3 | 1 | 361-5600 惰轮组件 | 齿轮的齿数为 72。 |
| 齿轮中用于轴承的孔径为 74.452 ± 0.015 mm (2.9312 ± 0.0006 in)。 |
|||
| 安装后轴承的孔径为 69.205 ± 0.013 mm (2.7246 ± 0.0005 in)。 |
|||
| 从齿轮后面嵌入的轴承长度为 1.00 ± 0.25 mm (0.039 ± 0.010 in)。 |
|||
| 4 | 1 | 360-0444 齿轮组件 | 齿轮的齿数 64。 |
| 齿轮中用于轴承的孔径为 60.163 ± 0.015 mm (2.3686 ± 0.0006 in)。 |
|||
| 安装后轴承的孔径为 55.663 ± 0.013 mm (2.1915 ± 0.0005 in)。 |
|||
| 从齿轮后面嵌入的轴承长度为 1.00 ± 0.25 mm (0.039 ± 0.010 in)。 |
|||
| 5 | 1 | 361-5595 曲轴齿轮 | 齿轮的齿数为 48 |
| 齿轮的孔径为 96.900 ± 0.020 mm (3.8150 ± 0.0008 in)。 |
|||
Caterpillar Information System:
C13 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
XQ175 Rental Generator Set Product Description
C7.1 Industrial Engine and Generator Set Intake Manifold Air Pressure Is High
C3.4B Industrial Engine Electrical System
C3.4B Industrial Engine High Pressure Fuel Lines
349F and 352F Excavators Machine System Specifications Shuttle Valve (Pilot Lines)
G3520E Generator Set Engines Event Codes
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C15 and C18 Petroleum Generator Sets Severe Service Application
G3520E Generator Set Engines Integrated Temperature Sensing Module - Test
G3520E Generator Set Engines Generator Output Power - Test
G3520E Generator Set Engines Fuel Metering Valve - Test
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
C3.4B Industrial Engine Model View Illustrations
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
793F and 793F CMD Off-Highway Truck Power Train Air Inlet System - Test and Inspect
XQ175 Rental Generator Set Belts - Inspect/Adjust/Replace
C6.6 Generator Sets Refill Capacities
320E and 323E Excavators Machine System Specifications Relief Valve (Line)
320E and 323E Excavators Machine System Specifications Control Valve (Auxiliary)
C280 Marine Propulsion Engines Injector Code - Calibrate
C4.4 Industrial Engine Clean Emissions Module
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
C4.4 (Mech) Marine Generator Set MCS-3 Troubleshooting