Refill Capacities
The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Auxiliary oil filter systems will require additional oil. Refer to the OEM specifications in order to find the capacity of the auxiliary oil filter.
Show/hide table
| Engine
Refill Capacities |
||
|---|---|---|
| Compartment or System | Minimum | Maximum |
| Crankcase Oil Sump(1) | |
|
Show/hide table
| (1) | These values are the approximate capacities for the crankcase oil sump (aluminum) which includes the standard factory installed oil filters. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
Show/hide table
| Engine
Refill Capacities |
|
|---|---|
| Compartment or System | Liters |
| Engine Only | |
| External System Per OEM(1) | |
Show/hide table
| (1) | The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Refer to the OEM specifications. Enter the value for the capacity of the External System in this row. |
Caterpillar Information System:
XQ175 Rental Generator Set Belts - Inspect/Adjust/Replace
793F and 793F CMD Off-Highway Truck Power Train Air Inlet System - Test and Inspect
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
C3.4B Industrial Engine Model View Illustrations
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258} Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
C13 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
XQ175 Rental Generator Set Product Description
C7.1 Industrial Engine and Generator Set Intake Manifold Air Pressure Is High
C3.4B Industrial Engine Electrical System
C3.4B Industrial Engine High Pressure Fuel Lines
349F and 352F Excavators Machine System Specifications Shuttle Valve (Pilot Lines)
320E and 323E Excavators Machine System Specifications Relief Valve (Line)
320E and 323E Excavators Machine System Specifications Control Valve (Auxiliary)
C280 Marine Propulsion Engines Injector Code - Calibrate
C4.4 Industrial Engine Clean Emissions Module
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
C4.4 (Mech) Marine Generator Set MCS-3 Troubleshooting
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electric Starting System - Test
XQ175 Rental Generator Set Voltage Regulators - R450 Automatic Voltage Regulator (AVR) (If Equipped)
C15 and C18 Tier 4 Final Engines Electronic Unit Injector - Adjust
CX28 On-Highway Transmission Specifications
C13 Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install
C13 Industrial Engines Idler Pulley